• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Blinker fuse issue

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
I'm not getting into another dielectric grease debate. You guys are just gonna have to trust me, it's the right thing to use.
 

bronkenn

Contributor
Bronco Guy
Joined
Apr 27, 2017
Messages
2,717
Loc.
Southeast Ohio
I'm not getting into another dielectric grease debate. You guys are just gonna have to trust me, it's the right thing to use.

Yep, That is what the engineers at GM required on all external connectors. They even wanted it on the weatherpack connectors. They had their own GM labeled dielectric grease. Ken
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
While I disagree on the bright lights being a bad thing on principal, I don't argue that the results can be a bummer if things don't work properly. I've used Osram 50w halogen backup lamps in my cars ever since discovering their existence back in the early seventies.

Granted, a small lamp housing like we have is not as good at heat dissipation as we'd like, but I make a point never to use my backup lights as work lights for extended periods either.
Well, I have actually done that, but by "extended" I mean more than 15 minutes or so.
I'm guessing it doesn't help when the wiring and connections are not as clean as new, and heat starts building up in parts other than the bulb itself.

Never had that problem on mine luckily, but have seen it often enough. I sure do dearly love being able to see so well out the back though. Those things really light up the trail behind me.
Those bright backup lamps in my '71 are really a wonderful thing. The '68 doesn't need them since it's got these wicked-ass round LED's that Doug installed near the bumper that are blinding enough on their own.
And that's probably the way to go nowadays anyway. With the plethora of compact super bright LED setups available to us, no reason to risk a melted lens anymore I guess.
When my existing ones and all the spares I have finally burn out, I'll likely go the way of the external LED as well.

Paul
 

tymbo

New Member
Joined
May 7, 2018
Messages
12
Loc.
Louisville, KY
Have you tried this yet?

14530b6df638fccc884e344aa7f51e09.jpg
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,619
Loc.
PNW
Sounds like the PO flunked wiring 101.

That said, in one weekend and about 250 bucks for an excellent quality generic wiring harness you'd be done...
Just sayinv as youll probably end up rewiring in the future.

Generic wiring harnesses for hot rods are the ticket.
 
OP
OP
Hinmaton

Hinmaton

Sr. Member
Joined
Oct 17, 2017
Messages
605
While I disagree on the bright lights being a bad thing on principal, I don't argue that the results can be a bummer if things don't work properly. I've used Osram 50w halogen backup lamps in my cars ever since discovering their existence back in the early seventies.

Granted, a small lamp housing like we have is not as good at heat dissipation as we'd like, but I make a point never to use my backup lights as work lights for extended periods either.
Well, I have actually done that, but by "extended" I mean more than 15 minutes or so.
I'm guessing it doesn't help when the wiring and connections are not as clean as new, and heat starts building up in parts other than the bulb itself.

Never had that problem on mine luckily, but have seen it often enough. I sure do dearly love being able to see so well out the back though. Those things really light up the trail behind me.
Those bright backup lamps in my '71 are really a wonderful thing. The '68 doesn't need them since it's got these wicked-ass round LED's that Doug installed near the bumper that are blinding enough on their own.
And that's probably the way to go nowadays anyway. With the plethora of compact super bright LED setups available to us, no reason to risk a melted lens anymore I guess.
When my existing ones and all the spares I have finally burn out, I'll likely go the way of the external LED as well.

Paul

I like bright, that's why I was reticent to go back to stock, but lenses aren't super cheap. all these old vehicles do have terrible back up lights- On my Jeep I wired some of the KC round pucks as an external assist. LED's ar ethe way to go for sure.

Sounds like the PO flunked wiring 101.

That said, in one weekend and about 250 bucks for an excellent quality generic wiring harness you'd be done...
Just sayinv as youll probably end up rewiring in the future.

Generic wiring harnesses for hot rods are the ticket.

I like the sound of that, and have looked at the Painless product and whatnot- hadn't looked at the generic stuff though- 250 bills sounds like a great way to go

Hinmaton
 
Top