• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

block confirmation

moses_m

Full Member
Joined
May 5, 2013
Messages
262
I need confirmation on this block

E0AE D3C 19

1980 302
A= Ford
E=Generic Ford

What do the rest of the letters represent?
 

Attachments

  • IMG_20140326_162908_726.jpg
    IMG_20140326_162908_726.jpg
    112.9 KB · Views: 186

baddad457

Sr. Member
Joined
Aug 24, 2011
Messages
560
Congrats, you've got the weak, lightweight 302 block that's 14 pounds lighter than the 68-79 blocks and 4 pounds lighter than the roller blocks. Keep the build mild and it'll be fine, try to stroke it or bump the compression and you'll run into trouble.
 
OP
OP
moses_m

moses_m

Full Member
Joined
May 5, 2013
Messages
262
gonna go with explorer setup that I got from a fellow member. The 50 oz balancer should work fine on this block since it is a 82?
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
Make sure you didn't get the 255

Too fuzzy during those years as to what imbalance factor was used. Too much conflicting information in the '80-82 years.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
'80-'82 it was a small bore 302. Smaller bore means special heads with even smaller valves and ports. Wasn't that good and was dropped after only a couple years of production
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
'80-'82 it was a small bore 302. Smaller bore means special heads with even smaller valves and ports. Wasn't that good and was dropped after only a couple years of production


I forgot all about that "thing". Tiny bore 3-3/16"..but very long stroke (4"). Came and went like a ghost in the night..:D
 
OP
OP
moses_m

moses_m

Full Member
Joined
May 5, 2013
Messages
262
Motor shakes at start up and when accelerating with 50 oz. Besides machining down my explorer 50oz or buying a new one what are my options? Has anyone tried the pro steet balancers with the counter weights?

Read the tech article. Has anyone tried the adapter pulley from drivenautoparts?
 

baddad457

Sr. Member
Joined
Aug 24, 2011
Messages
560
I forgot all about that "thing". Tiny bore 3-3/16"..but very long stroke (4"). Came and went like a ghost in the night..:D

It was the same stroke as a 302, just a smaller bore. 3.68 bore x 3.00 stroke
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
It was the same stroke as a 302, just a smaller bore. 3.68 bore x 3.00 stroke

Well that makes a heck of a lot more sense...I was referring to my tattered 1982 copy of the TRW Engines Parts Specification and they had it as 3 3/16 x 4.0 numbers. Apparently a misprint. I've never had to lay hands on one..probably because nobody wanted to rebuild 'em.
 

baddad457

Sr. Member
Joined
Aug 24, 2011
Messages
560
A 4" stroke 302 block based crank would be worth it's weight in gold, if it weren't for the fact that the 255 cranks were prone to breaking in half. I got the specs from Ford's Mustang 5.0 reference manual. I've only seen the head off one, they had those "vagina" shaped intake ports;D
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
A 4" stroke 302 block based crank would be worth it's weight in gold, if it weren't for the fact that the 255 cranks were prone to breaking in half. I got the specs from Ford's Mustang 5.0 reference manual. I've only seen the head off one, they had those "vagina" shaped intake ports;D

I only knew, back in the day, that they even existed, because we (was an automotive machinist then) were advised rather strongly by our suppliers to never touch one..we were told to always substitute a 302 reman instead.
 

baddad457

Sr. Member
Joined
Aug 24, 2011
Messages
560
Yea, I can see why with their fragile cranks (which probably found their way into a few 302's) and tiny port and valved heads.
 

Canuck

Full Member
Joined
Feb 25, 2005
Messages
199
Loc.
Corunna Ontario
The way the coding was explained to me man yeears ago, ford started in 1940`s with "A", 50`s "B",60`s "C"..................................
Second number is the year "E" would be 80`s , A0=80, A1=81' A2=82.............
AE is Ford truck, OE is Ford car
Please correct me if I am slightly off the mark
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
The way the coding was explained to me man yeears ago, ford started in 1940`s with "A", 50`s "B",60`s "C"..................................
Second number is the year "E" would be 80`s , A0=80, A1=81' A2=82.............
AE is Ford truck, OE is Ford car
Please correct me if I am slightly off the mark

A0 ='40
A1='41

E0='80
E1='81

The engineering dates are only change when there was a design change. No design change, number stays the same. Or the part already exists and will bolt into another vehicle, no change. You can find truck numbers installed in cars and car numbers installed in trucks, all factory and correct. Not perfect, but better then nothing.
 

baddad457

Sr. Member
Joined
Aug 24, 2011
Messages
560
The way the coding was explained to me man yeears ago, ford started in 1940`s with "A", 50`s "B",60`s "C"..................................
Second number is the year "E" would be 80`s , A0=80, A1=81' A2=82.............
AE is Ford truck, OE is Ford car
Please correct me if I am slightly off the mark

"AE" in the prefix denotes a full size Ford car. If it were a truck part, there would be a "TE" here. "A" designates a full size car, "T" designates a truck part. The "E" tells you this is an Engineering number. If it were a part number there would be a "Z" in this position in the prefix.
 

Quick & Dirty

Sr. Member
Joined
Feb 15, 2004
Messages
857
"O" would be mid size cars, Fairlane, Torino, LTD II...

Most pre-80's small block parts have the "O", as the first small block 221 was designed for the new Fairlane in '62. No bearing on what they are actually installed in.
 
Top