This is how I see mine working as well. Since my truck had nothing there when I bought it (all burned in fire 20 years back), I have a new stock switch and a new pushrod (Tom's power booster), no bushing. So far it works great. Lights come on with just a small amount of pedal movement, just before the pushrod actuates the booster/master.It's been awhile since I looked at my brake switch, but my thinking was that the flat on the end of the pushrod tended to rotate around the center bushing as the pedal was depressed, and the corners on flat activated the switch.
If you get tired of dealing with this in the future, as mentioned by other members above , I’d consider switching to a plunger style. I battled both the inline pressure switch and the ford style at the pedal pivot point for years and the plunger just works consistently. I have one from Painless mounted on a simple bent steel bracket under the dash.
Sent from my iPhone using Tapatalk
![]()
These inline switches work. Always.
Sent from my iPhone using Tapatalk
Yep finding /getting one that works at low enough pressure to turn on the lights May late a couple trys,,, or having to skid to a stop to get the brake lights to come on..Yeah, not for me. Maybe it was due to placement on my truck (too close in proximity to headers?), but I went through 2 in about 2 years time.
Sent from my iPhone using Tapatalk
Jeep used those pre 1976 in their brake systems, there was a port in the master cylinder for them. They always failed. If you can get them to work and live, fantastic, most of us can’t get them to live a few weeks.![]()
These inline switches work. Always.
Sent from my iPhone using Tapatalk






