• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Brake light switch conversion on 66?

Dakota

Jr. Member
Joined
Feb 2, 2007
Messages
116
Loc.
Sunny South Dakota!
I have searched threads on here and learned some, but would like to know who has done this, and how you did it? My truck had the original pressure switch on the MC, now I have converted to dual chamber MC and rewired the truck, so I need the electric switch on the pedals, but my 66 pedals are not ready for the switch.

Any tips?
 

fordtrucks4ever

Bronco Guru
Joined
Oct 8, 2006
Messages
1,280
Loc.
DFW
The 66 had a nut/bolt to M/C. You can either modify the late model switch to fit or replace the pedal with a 67 and newer. I will double check this if I get a chance tomorrow to make sure this is correct.
 

fordtrucks4ever

Bronco Guru
Joined
Oct 8, 2006
Messages
1,280
Loc.
DFW
If using the original M/C rod you may have to build up a boss(weld) on back where it makes contact against stitch. Otherwise a later model rod can be made to work.
 

vuke

Full Member
Joined
Nov 21, 2004
Messages
229
Loc.
Red Bank, NJ
I went through this same thing 2 years ago. Simple fix I got a cheapo brake light swith from NAPA and welded up an "L" shaped bracket out of some scrap steel I had laying around and bolted it to the bottom of my dash making it the right length for the pedal to completly push in the switch while at rest and hook it up by lengthening the wires from the MC and sending them through the firewall. Cost me about $3 and hasn't failed me yet.
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
I used the later(I think 78) push button style switch. I made a bracket out of l-metal to hold it. I had problems with making the later eb switch work on the 66 pedal set-up.
 

buckedupbronc

Jr. Member
Joined
Apr 8, 2006
Messages
92
Loc.
Charleston
On mine I just put the old pressure switch in line after the Por/valve works fine, although I believe the elec. switch to have a much faster response time than the pressure switch.
 

bfoldy

Contributor
Sr. Member
Joined
Sep 13, 2004
Messages
796
Loc.
Torrance, CA
I just did same thing here. Just re-used the old pressure switch by using a tee coming off the M/C for the rear brake line. Seems like a much easier solution than rigging up a brake light switch on the brake pedal itself. Although, I must say I won't have it on the road again to test it out until this weekend. Should be fine though.
 

buckedupbronc

Jr. Member
Joined
Apr 8, 2006
Messages
92
Loc.
Charleston
If I remember correctly the switch was like a 1/8 " npt so the tee you needed was inverted flare side to side and the top of the tee was the npt threads
 

KManuel

Full Member
Joined
Dec 17, 2005
Messages
212
Loc.
Cape Cod
Dakota,
I'm in the same boat. I did not know the pedals were different and have spent all morning trying to make it work.

Anyone know what the diffrence is in the pedals? What it would take to modify the pedal to work?

Kevin
 
Top