• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Brake lights don't work

R1bit

New Member
Joined
Mar 3, 2022
Messages
15
Help!!! new-by here.
Rear turn signals work, lights work but
No reverse or hazards and left brake light doesn’t work. Changed fused, changed bulbs, ordered new housing. Couldn’t find a break but no power at the plug to the left reverse…Finally got marker lights working so that’s a win.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
What year bronco? If a 74 and later with the hazard switch integrated into the steering column turn signal switch, that can change some of the diagnosis.

Since the wires to the left and right sockets are separate for brakes, you might follow the wire bundle up along the frame to the front and make sure there aren’t any spots where they are pinched or rubbed, or maybe even melted through by a dual exhaust.

For the hazards, since you checked the fuse (no fuse for brake light) you could check the flasher unit next. You can temporarily swap the turn signal flasher for the hazard flasher since you know that one works. This is one way to test the system.
It’s always possible for the hazard switch to have failed, but more often than not it’s the flasher that wears out first.
But turn signal switches fail too, which can mess with the brake lights.
 
OP
OP
R1bit

R1bit

New Member
Joined
Mar 3, 2022
Messages
15
What year bronco? If a 74 and later with the hazard switch integrated into the steering column turn signal switch, that can change some of the diagnosis.

Since the wires to the left and right sockets are separate for brakes, you might follow the wire bundle up along the frame to the front and make sure there aren’t any spots where they are pinched or rubbed, or maybe even melted through by a dual exhaust.

For the hazards, since you checked the fuse (no fuse for brake light) you could check the flasher unit next. You can temporarily swap the turn signal flasher for the hazard flasher since you know that one works. This is one way to test the system.
It’s always possible for the hazard switch to have failed, but more often than not it’s the flasher that wears out first.
But turn signal switches fail too, which can mess with the brake lights.
It’s a 74 and I’ve literally had it 3 days!!!
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Nice, congratulations!
Always something to figure out on these old rigs.

Check some of those things out and let us know what you find.
 
OP
OP
R1bit

R1bit

New Member
Joined
Mar 3, 2022
Messages
15
I will. I have a list which keeps growing and mostly electrical! Gas gauge and instrument lights and speedometer cable. Install emergency brake (was just gone) feeling overwhelmed.
 
Top