• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Bronco Cooling

ghundt

New Member
Joined
Dec 21, 2009
Messages
15
I am looking for information on installing a Black magic extreme fan in my 71 bronco, My research tells me that i will need to build a custom core support to get the necessary 4 1/2 in clearance between the fan and the water pump pulley. What i am unsure of is how far forward i can go without getting into hood problems, I plan to get rid of the stock lock mech and go with hood pins , the bronco also has a two in lift, if that helps.
 

beaux312

Sr. Member
Joined
Nov 10, 2007
Messages
940
Loc.
Hartford, AL
I got a 18"electric of a 03 or 05 Jeep G/C its a 2 speed. I run mine on low and never had a over heating issue. I made some brackets and mounted it in my stock fan shroud. Had plenty of room bout an inch between back of fan and W/P
 

jw0747

Bronco Guru
Joined
Nov 22, 2006
Messages
2,434
Loc.
San Antonio, TX
if your Bronco has overheating problems there are a number of reasonable solutions available long before you need to start modifying the core support. let us know.
 
OP
OP
G

ghundt

New Member
Joined
Dec 21, 2009
Messages
15
Thanks for the info, I am running a 302, not stock by any means, i have a 18in black magic fan from another project, that's why i am asking, when i got this bronco it was in bad shape, the core support had been completely butchered, not sure why but who knows why people do what they do to old broncos, since the support is destroyed, i figured i would build a support out of 4130 since i have a stick laying around. I should have said I have a 2 in body lift as well. I will post some pics as I go, I think if i drop the radiator down about 1 1/2 inches and move it forward 2 in getting rid of the stock latch assembly that might work.
 
Top