• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

C4 Shifting Problems

Borinqua Bronco

Jr. Member
Joined
Dec 31, 2016
Messages
64
Hello everyone,

I am looking for some advise about transmissions and ideas of how screwed I am. I have a '74 302 automatic and it's having problems shifting. For the last month or so when I start it up and haven't driven for a few hours (definitely if sitting overnight) I can shift from Park to Drive and there is no change in RPM or sound and the transmission fails to shift to Drive regardless of how long I let it sit. (I let it sit for 2 full minutes today before typing this message) If on the other hand I start up the Bronco and shift from Park to 2nd it will shift directly to 2nd gear. I am then able to move it up to Drive and continue my drive to work. Any ideas? The fluid is full and clean. No other maintenance done recently. If I drive around for 10 -15 mins, to the gas station for example, I can shut the engine off, get my gas and when i start back up it will shift into Drive with no problem. Generally if it doesn't sit for longer than 2-3 hours it will work as advertised.

Thanks for your help.
 

Tiko433

Contributor
I know just enough to be dangerous
Joined
Jul 9, 2014
Messages
1,898
Loc.
Bolivia, North Carolina
I'm no expert but I did rebuild my C4 a few months ago. Shut out to Bad Shoe productions. I would drop the value body and clean it and check band adjustment
 

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
I also rebuilt my C4 and it had similar behavior. It would only move if I revved the engine or waited for it to eventually engage. When I took it apart the o-rings on the piston were hard as rocks.

If you get the video from Bad Shoe Productions and the parts from BulkParts.com. I have to say it is more work taking it in and out than it is rebuilding it. You only need one special tool and the video shows an example so you can make one.
 

Tiko433

Contributor
I know just enough to be dangerous
Joined
Jul 9, 2014
Messages
1,898
Loc.
Bolivia, North Carolina
I was surprised at how easy it was , his video walks you through every single step. Buy a full rebuild kit and give it a go. again I would drop the VB and clean it , his video walks you through cleaning the VB . You can drop the VB while it's in the truck. I would even try to save the fluid. It's worth a try but Mine had the symptoms , it had bad clutch disc .
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
Hello everyone,

I am looking for some advise about transmissions and ideas of how screwed I am. I have a '74 302 automatic and it's having problems shifting. For the last month or so when I start it up and haven't driven for a few hours (definitely if sitting overnight) I can shift from Park to Drive and there is no change in RPM or sound and the transmission fails to shift to Drive regardless of how long I let it sit. (I let it sit for 2 full minutes today before typing this message) If on the other hand I start up the Bronco and shift from Park to 2nd it will shift directly to 2nd gear. I am then able to move it up to Drive and continue my drive to work. Any ideas? The fluid is full and clean. No other maintenance done recently. If I drive around for 10 -15 mins, to the gas station for example, I can shut the engine off, get my gas and when i start back up it will shift into Drive with no problem. Generally if it doesn't sit for longer than 2-3 hours it will work as advertised.

Thanks for your help.
Old seals. Time for a rebuild.
 

sanndmann3

Contributor
Bronco Guru
Joined
Jun 13, 2007
Messages
1,832
C4 is pretty easy to rebuild and can be upgraded with better clutches and other mods to handle some pretty decent power. A pretty stout unit.
 

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
Quick double check - did you check the fluid hot? That makes a difference.

If it engages warm but not cold that is in my experience tied seals.
 
OP
OP
Borinqua Bronco

Borinqua Bronco

Jr. Member
Joined
Dec 31, 2016
Messages
64
Yes, checked my level while at operating temp and engine running. Looks like it's time for a rebuild. Thx everyone
 
Top