• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Centech Install - Rear Harness Clips

zapem10

New Member
Joined
Apr 5, 2020
Messages
7
I’ve tried to find some information on routing the back portion of the Centech wiring harness but haven’t been able to find my specific question. The ridged protective cover on the harness doesn’t fit into any of the old wire clips. Do I need to have it clipped in or can I freely route it from the tail lights to the front of the car without using clips? If I need clips does anybody know what type/size I need?

Thanks!
 

nickgp

Bronco Guru
Joined
Jan 17, 2010
Messages
1,024
Zip tie it in place unless you’re doing a 100 point restoration
 

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,782
Go to ace hardware, they have automotive clips I used that slide onto the edge of the sheetmetal ridge above the rear of the tank, and hold the wire. They are in nuts and bolt area, by the bushings, only one drawer so I missed it 3 times, owner of store never knew he had them
 
Top