• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Complete Floor Pan and Platform Set

jmangi62

Bronco Guru
Joined
Jul 28, 2013
Messages
2,512
Only thing is they shouldn't have cut the hole in the trans tunnel because many owners have different trans and t-case set ups,otherwise it looks like a nice piece.:cool:
 

B Rousseau

New Member
Joined
Feb 9, 2014
Messages
27
Loc.
Southaven
Complete floor pan

I have been contemplating this same thing for a while. Think I will be getting the complete pan. Spend a couple hundred more but gotta save many hrs of labor. Maybe someone has gone this route before and share the quality of the piece.
 

74NJBronco

Full Member
Joined
Nov 27, 2010
Messages
284
Loc.
Livingston, NJ
I bought that very item from BGY. Welds and assembly looked totally stock. Check out www.bentmetalcustoms.com (1970 bronco)and you will see the floor cut out and installed. All of the work by this shop was top notch. All of the sheet metal work was way beyond my skills.
 

moses_m

Full Member
Joined
May 5, 2013
Messages
262
Wild horses has it as well. Would check shipping on both since it is big and bulky.
 

englewoodcowboy

Lick Creek Restorations
Joined
Jul 25, 2010
Messages
4,201
I would seriously consider this if I were to do it again. I have started and I am not complete with the floor pans. Check out the start date on my build tread and you can see why I would consider it. http://classicbroncos.com/forums/showthread.php?t=223538


No offense to mudstud but I did the entire floor, front clip, inner kick panels, rear quarter panels and bed in less than 90 days. That was only working a few hours every night and some full weekends. It would have been done sooner if I didn't have to wait for my tax return to arrive as well. It was a challenge but I would not rate it as too difficult being I did it and this is my first real go at body panel replacement. Since I have now done it, I would not hesitate at all of doing it again on another ride. I too looked at the full welded set but opted out because my floor rails were in excellent shape and my outer rockers were almost perfect not requiring them to be removed. If my outer rockers were toast and inner rockers as well, then I would have pulled the trigger. By not buying it I saved myself about $300 towards other items I needed.
 

mudstud

Contributor
Bronco Bonehead
Joined
May 19, 2005
Messages
1,517
Loc.
Excel
No offense taken I do not find it difficult. I just need time. If you notice in my build tread I replaced both inner and outer rockers on both sides and two of the floor channels. I am getting the experience of welding all those plug welds but I do not get to do it consistently like you did to get proficient at it. That is why I would opt for the assembly.

No offense to mudstud but I did the entire floor, front clip, inner kick panels, rear quarter panels and bed in less than 90 days. That was only working a few hours every night and some full weekends. It would have been done sooner if I didn't have to wait for my tax return to arrive as well. It was a challenge but I would not rate it as too difficult being I did it and this is my first real go at body panel replacement. Since I have now done it, I would not hesitate at all of doing it again on another ride. I too looked at the full welded set but opted out because my floor rails were in excellent shape and my outer rockers were almost perfect not requiring them to be removed. If my outer rockers were toast and inner rockers as well, then I would have pulled the trigger. By not buying it I saved myself about $300 towards other items I needed.
 
Top