• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Custom PS hoses?

DC_Gearhead

Sr. Member
Joined
Dec 28, 2015
Messages
660
I have a Saginaw pump and stock box, but I hate the way the hoses and hard lines look and fit. It's like a pile of metal tubing and rubber hoses. Has anyone made a custom set of hoses? If so do you have the fitting sizes for the pressure side and return?

Does 11/16-18 on pressure side of box and 5/8-18 on return sound right? Buy adapters that convert to -6AN then buy 45s (-6AN inverted flare x -6AN hose)?


I saw some YouTube videos and it looks like they sell the pieces. I just need the sizes for fittings.

Any help would be appreciated. Thank in advance!

DC


Sent from my iPhone using Tapatalk
 
Last edited:

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
Some of the Saginaw pumps are metric depending on application. I took my stuff to a local earls distributor to confirm sizes.
 

gr8scott

Contributor
Bronco Guru
Joined
Jul 1, 2011
Messages
1,890
Has anyone made a custom set of hoses?

Most of us running hydro-boost have made our own, so it is doable. Used -6 an conversion fittings when I made mine. Sorry, don't remember the
sizes. Maybe your hardware store has a thread-checker. Take your hoses to see what the sizes are.
 

Attachments

  • H-boost2.jpg
    H-boost2.jpg
    156.9 KB · Views: 111
OP
OP
DC_Gearhead

DC_Gearhead

Sr. Member
Joined
Dec 28, 2015
Messages
660
Most of us running hydro-boost have made our own, so it is doable. Used -6 an conversion fittings when I made mine. Sorry, don't remember the
sizes. Maybe your hardware store has a thread-checker. Take your hoses to see what the sizes are.


That looks sexy!! Damn. That's what I'm going for.


Sent from my iPhone using Tapatalk
 
OP
OP
DC_Gearhead

DC_Gearhead

Sr. Member
Joined
Dec 28, 2015
Messages
660
Some of the Saginaw pumps are metric depending on application. I took my stuff to a local earls distributor to confirm sizes.


Looks like that's what I'll have to do.


Sent from my iPhone using Tapatalk
 

gr8scott

Contributor
Bronco Guru
Joined
Jul 1, 2011
Messages
1,890
One more thing...when you order your fittings make sure they're steel. Stay away from aluminum. That sag pump makes over 1000 psi.
 
OP
OP
DC_Gearhead

DC_Gearhead

Sr. Member
Joined
Dec 28, 2015
Messages
660
One more thing...when you order your fittings make sure they're steel. Stay away from aluminum. That sag pump makes over 1000 psi.


Thank you!! I didn't even think about that!


Sent from my iPhone using Tapatalk
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
I called Earl's and Russell a few years back and their alum AN fittings for p/s fittings are rated MUCH higher than 1,000 psi, I think double. Let me see if I can find the specifics
 
Last edited:

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
Here I just looked it up on Master Carr. You are fine using high quality alum fittings on the high pressure side of p/s systems. It's been done for decades w/o incident because of the safety factor built in to the working pressure ratings.
 

Attachments

  • 20210830_220423.jpg
    20210830_220423.jpg
    49 KB · Views: 50
Last edited:
OP
OP
DC_Gearhead

DC_Gearhead

Sr. Member
Joined
Dec 28, 2015
Messages
660
Here I just looked it up on Master Carr. You are fine using high quality alum fittings on the high pressure side of p/s systems. It's been done for decades w/o incident because of the safety factor built in to the working pressure ratings.


Good clarification on the “high quality”, since you can order cheap aluminum fittings on Amazon. I'd rather not depend on a cheap $3 fitting for 1000psi.


Sent from my iPhone using Tapatalk
 

Hazegray

Sr. Member
Joined
Aug 10, 2004
Messages
795
I would recommend finding a local hydro shop as they typically make hoses for high pressure applications. Cost me less than $100 for a local shop to make mine, but I supplied the fittings.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
Problem I run into with hoses made at the local shop is crimp on ends means you need to have the routiing and the exact, I mean exact clocking of the fitting (any fitting that isn't straight). If the end is crimped on you cant rotate that hose to make it line up. :(

Hoses that you build in your shop and can repair on tbe trail allow you to rotate your fitting ends for proper hose routing.

Just a heads up.
 

brewchief

Sr. Member
Joined
Feb 11, 2007
Messages
877
Wildhorses has the adapter fittings listed in their catalog, I did mine years ago with fittings and teflon lined hose from speedway motors.

Sent from my SM-G965U using Tapatalk
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
Best price for me is my local (45miles one way) hydr shop. $2-3/steel fitting compared to buying at Summit for $12-18/fitting.

Summit has Russell teflon lined hose in braided SS. Looks nice and is extremely flexible and you can rotate your fittings to align the hose properly but takes absolutely ZERO, I mean no abrasion resistance at all even against a flat pc of sheetmetal. So make sure if you use SS braided lines that they are absolutely not touching anything except AIR and your fancy hose hangers (spaced closely).
 

Digger556

Sr. Member
Joined
Aug 8, 2013
Messages
801
I used Aeroquip FC300 hose and fittings from Speedway Motors. Also bought the necessary adapters to convert the Saginaw pump and Delphi box to JIC fittings (AN) I used standard 3/8" PS low pressure hose for the return lines. Most modern power steering fittings are M18x1.5 or M16x1.5 threads with the same o-ring seal for domestic stuff. Older PS systems will use inch-threads with 45° taper fittings.


51117908232_47b51d37df_o.jpg

51118229494_170b1f53d9_o.jpg

51118387953_259ba6f54d_o.jpg
 

tripleJs15

Full Member
Joined
Jun 20, 2020
Messages
166
Most of us running hydro-boost have made our own, so it is doable. Used -6 an conversion fittings when I made mine. Sorry, don't remember the
sizes. Maybe your hardware store has a thread-checker. Take your hoses to see what the sizes are.

Are you using PTFE lined hoses or regular?
 
Last edited:

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
I used fittings and hose from speedway automotive. I used their blue 2,000 psi hose. they have low pressure and high pressure blue hose So make sure you get the right one. Areoquip FC300 hose I got all the fittings from them too for the GM Saginaw pump, the fittings for the Ford Hydraboost, and the factory Ford steering box.
 

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,782
google parker hose in bethesda, about 30 places came up. Take in what you have, they will make one end on each new hose, you take it home, cut and align how you want other side to fit. Go back again and they finish it for you.
 
Top