• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

cut to uncut

69Hodad

Jr. Member
Joined
Apr 25, 2005
Messages
111
Loc.
Long Beach
Looking at putting a cut Bronco back to uncut using the 1/4 lower panels offered by JBG or TBP. I am going to turn this over to a pro. Has anyone here done this? Is it more of a pain in the arse then it appears? What is the shop time I should expect per side, 3 hours, 3 days? West Coast Broncos said they have done this type of work before, has anyone had it done there? I have had work done by John and his team before and was very happy with it, but I did not know they did body work. Anyways any advice is always appreciated>
 

rastiss

Bronco Guru
Joined
Jan 5, 2013
Messages
1,264
Loc.
Wichita falls, Texas
as a guess depending on what is there to work with, book time in a shop is prolly 8-12 hours per side. condition of the other panels you are welding to makes a big difference. my dad has some of the old mitchell body pricing books from the 60's to 70's. next time i go visit them i'll try to get some copies for the eb's. i have already got some for mustangs.
 

bteutsch

Sr. Member
Joined
Jan 11, 2009
Messages
875
I had it done, not really cut to uncut, but uncut to uncut, PO beat the crap out of the uncut fenders to fit coop tires, I used the JBG lower quarters, they fit pretty well, we did trim the bottom of the rear of the panels to match the original body lines they seemed to have a steep angle that wasn't like the factory fenders on mine. They turned out great, not sure what it would cost but I had a buddy do it and I helped as much as he would let me..


Have pictures of fenders removed and installed in this Facebook album

https://m.facebook.com/?refsrc=http...9510766168.26989.1781273909&__user=1781273909
 

smitty68

Jr. Member
Joined
Oct 24, 2012
Messages
52
Loc.
Spanaway
I had it done, not really cut to uncut, but uncut to uncut, PO beat the crap out of the uncut fenders to fit coop tires, I used the JBG lower quarters, they fit pretty well, we did trim the bottom of the rear of the panels to match the original body lines they seemed to have a steep angle that wasn't like the factory fenders on mine. They turned out great, not sure what it would cost but I had a buddy do it and I helped as much as he would let me..


Have pictures of fenders removed and installed in this Facebook album

https://m.facebook.com/?refsrc=http...9510766168.26989.1781273909&__user=1781273909


Dang!!! That came out nice.
 

Pat B

Full Member
Joined
Aug 21, 2012
Messages
154
It's not a real big deal to do...
I used a cut off wheel to get within 1/4" of each seam. Used a air chisel to separate the spot welds (gently), ground the burrs off from the spot welds. The cool (in my mind) thing to do is use panel adhesive on the rear and upper seams and spot weld the door jam side.

It took about 3 hours per side.

Pat
 

Dbarnes72

Sr. Member
Joined
Mar 18, 2009
Messages
643
Loc.
Eastern Wa.
I'm in the process right now. Pretty easy work although it's taking me longer than 3 hours a side cuz I'm slow. I'd wanna gas Pat's 3 hours up to 6 hours for just a straight changeout. If there's some rust repair in there, who knows? I'm taking the opportunity to wire wheel and Por-15 all of the freshly exposed inner panel surface.
 

fatboy

Contributor
Glad to be here.
Joined
May 15, 2006
Messages
7,145
Loc.
New Hampshire
The cool (in my mind) thing to do is use panel adhesive on the rear and upper seams and spot weld the door jam side.

It took about 3 hours per side.

Pat

Several guys out here in New England actually bolted on their quarters so that they can remove them for cleaning to eliminate and mud packed pockets after a trail ride. You cannot even tell.
 

76MaBronco

Contributor
Bronco Guru
Joined
May 21, 2007
Messages
4,221
Loc.
Massachusetts
Several guys out here in New England actually bolted on their quarters so that they can remove them for cleaning to eliminate and mud packed pockets after a trail ride. You cannot even tell.

Todd's truck has it done. I didn't even notice until he pointed it out. Looks factory from the outside and eliminates the seam welds, which will rust...its just how its designed...
 

rastiss

Bronco Guru
Joined
Jan 5, 2013
Messages
1,264
Loc.
Wichita falls, Texas
It's not a real big deal to do...
I used a cut off wheel to get within 1/4" of each seam. Used a air chisel to separate the spot welds (gently), ground the burrs off from the spot welds. The cool (in my mind) thing to do is use panel adhesive on the rear and upper seams and spot weld the door jam side.

It took about 3 hours per side.

Pat


not all adhesives are the same. some do NOT recommend gluing verticles on a bedside/quarter install especially at the rear. be sure to follow what the manufacturer recommends.
 

Zeke

Full Member
Joined
Feb 15, 2002
Messages
191
Bolt on Quarter Panels

Can someone post some pictures of the bolted on quarters?

Thanks,
H
 
OP
OP
6

69Hodad

Jr. Member
Joined
Apr 25, 2005
Messages
111
Loc.
Long Beach
bolt ons

Speaking of bolt-ons, now I am distracted. Most def, some pictures would be welcome. (the bronco kind or the saline kind)%) I think I just hijacked my own thread...............
 
Top