Dana 20 help please!

[Hozr]

Ok, I'm confused. I've searched bu can't find an answer.

I'm twin sticking my D20 - 1968 stock t-shift

After reading all the guides I decided to pull it apart and remove the interlocks. Only problem is, I got it apart and there are no interlocks nor is there any provision for them. I can pull the rails individually with no modifications.

Am I missing something here?

Thanks

 

[70_Steve]

How far apart did you get it? the "interlocks" or detent rods, are between the shift rails. So, you have to remove the shift forks, from inside the case, then you can pull out the shift rails.

This may help:http://www.classicbroncos.com/dana20/dana_20_manual.html

 

[Hozr]

It was completly apart. There were no "pills" to be found. Both shift rods were smooth on the insode just detents for the bearing/spring on the outsides. So much for thinking this thing was stock.

Oh well, it's back together and shifts easily by hand.

Thanks

 

[Viperwolf1]

I don't suppose you have any pictures? What are the B/M and serial numbers?