Diamond plate door inserts

[76MaBronco]

Ah, the code of the wifespeak...;D

 

[74creamsickle]

Very nice job!!! They look GREAT !!!!

 

[73ny]

Wow, that's bada$$!

 

[75dlydrvr]

Pretty cool

 

[roundhouse]

NICE!!!

Thats is truly talented fab work.

Now can you move the front leg of the roll cage?

I have big feet and its kinda in the way.

 

[j.blakeslee]

Ok not to much going on today soo i get to work on the bronco...;D ;D . i got the drivers side mounted. It still needs a little back cuts here and there. the passager side is mounted as well. it fits great up front the back is a whole other story... i guess if i keep f@(king with it ill get it right. for mount i'm gonna use the the the six floating bolt plates in the door post, and in the back just some nuts welded in to the striker post. in pic # is the part i'm having trouble with....i cant seem to get it right....%)

 

[j.blakeslee]

Little More Done...

 

[76MaBronco]

Very nice jay, keep up the great work!!!

 

[j.blakeslee]

THANKS STEVE,Well The Passager Side Is Done....;d And The Pcs Are Cut For The Drivers Side Ill Blast That One Out In The Morning....and The Backing Plates

 

[marty]

hey jay after looking at how cool those insert look how hard would it be to see if you could maybe weld them together from the inside maybe then you could use some sort of seam sealer on the outside to finish off. unless you guys like that tough welded look. just throwing it out there.

 

[j.blakeslee]

hey jay after looking at how cool those insert look how hard would it be to see if you could maybe weld them together from the inside maybe then you could use some sort of seam sealer on the outside to finish off. unless you guys like that tough welded look. just throwing it out there.

Hey Marty, I like the welded look...But they could be grounded down for a clean look. the jig i maded would be to tite to weld from the inside. Plus I had to cut these by hand(cut off wheel, sawsall and elec hand shears) i want to finsh them up and then my buddy's gone help me lay them out to cut them on the plasma table.then there alot less time involved and cleaner cut etc.

 

[av8rds]

very nice Jay....looks like a good prize for :cough cough: BYOB !

 

[j.blakeslee]

very nice Jay....looks like a good prize for :cough cough: BYOB !

There will be a set for the for the raffle....

 

[HOTTAMALEE]

just like there will be "cough cough" womens tanks or tee's ! rite sean!?!

 

[tasker]

something like that.....or an autographed JD bottle

 

[j.blakeslee]

Well the drivers side is done..... time to clean them up and get and make up some soft door hardware.....I got a few ideas.... and then fix the hole in the floor under the passager set and the heater core and on and on...;D

 

[sprdv1]

Very Cool Jay..! That kinda grows on ya

 

[Chief Master Sergeant]

If you start selling these I would buy a set. They look great! Good job

 

[msweb]

VERY nice!!!!!!!!!!!!

 

[Scoop]

Jay, outstanding job! ;D