• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Disk Brake Kits

OP
OP
joebronco73

joebronco73

Contributor
Full Member
Joined
Mar 16, 2009
Messages
276
Loc.
Lago Vista, TX
I did some number crunches and doing a you-pull-it part sourcing would save me +/-$150, but take longer. At that rate, having the right parts sooner is worth the cost, to me. If I had all summer to do the conversion, that'd probably be my course of action. As for the prop valve, I will need one, since I'm keeping drums in the rear.
 

doghows72

Bronco Guru
Joined
Jan 5, 2005
Messages
2,036
I did some number crunches and doing a you-pull-it part sourcing would save me +/-$150, but take longer. At that rate, having the right parts sooner is worth the cost, to me. If I had all summer to do the conversion, that'd probably be my course of action. As for the prop valve, I will need one, since I'm keeping drums in the rear.

Yup, that's what I came up with as well.
 
OP
OP
joebronco73

joebronco73

Contributor
Full Member
Joined
Mar 16, 2009
Messages
276
Loc.
Lago Vista, TX
And as an update: I asked the repair shop to confirm some things for me. Among those things was the brake shop "inspection fee". Unfortunately (yet kind of expected), they said they had to charge more because it was a 4x4... ?:? Then, they claimed extra work had to be done because the hubs (new warn premiums that were installed ~2 weeks before the accident) were rusted on and couldn't be taken off...? Starting to sound like a con to me. I called the repair shop and told them that I didn't want the brake shop touching it anymore than they had. I will be towing it back to the stable Monday.

Sorry for the rant!
 

Skiddy

Bronco Guru
Joined
Oct 8, 2003
Messages
11,587
And as an update: I asked the repair shop to confirm some things for me. Among those things was the brake shop "inspection fee". Unfortunately (yet kind of expected), they said they had to charge more because it was a 4x4... ?:? Then, they claimed extra work had to be done because the hubs (new warn premiums that were installed ~2 weeks before the accident) were rusted on and couldn't be taken off...? Starting to sound like a con to me. I called the repair shop and told them that I didn't want the brake shop touching it anymore than they had. I will be towing it back to the stable Monday.

Sorry for the rant!
I don't blame you, sounds like they don't know how to take them apart. the porp valve is kind of iffy, some need it and some don't. I didn't on mine. but as sure as you don't order one you would need it lol
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Well it was a long-shot, but I had to bring it up. Look forward to having you up this way sometime.

Good luck with the brake stuff.

Paul
 

Pops68

Contributor
Bronco Rookie
Joined
Oct 11, 2010
Messages
1,777
Loc.
Bazetta Township
In MY opinion.....brakes and steering are the 2 most important safety issues on any vehicle. WHY anyone would want to skimp on price for questionable used parts for these systems is beyond me. It is true that not all brand new parts work perfectly and may be of lesser quality than original parts, but.....

BUY NEW and save money buying other used parts on less essential safety-related parts.

Pops
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
If I we're doing this today I would definitely buy the kits out there.
Lots of Chevy applications for us. All very similar with the only difference being the small backing plate caliper mounts and the large ones that cover the whole backside of the rotor acting like a big, heavy dust shield.

The Ford disc swap option is better but more expensive whether you go junk yard or vendor kit. The Chevy caliper mounts will flex more than the Ford. This gives a slightly softer pedal but beyond that the performance of the two is very similar.

I did my front disc swap using junk yard parts back in '89.
Duff's Ford swap kit cost about $700.00 bucks before shipping back then....And they were in Washington back then....So big shipping costs for me here in Orlando Florida. I still have those junk yard brakes on the front of mine. Only thing new is the pads and the hoses. Nearly thirty years later I am still using those backing plates, calipers and spindles. I paid $45.00 dollars for more parts than I ended up needing from the Campbell City Junk Yard here in Central Florida.
Two of you mentioned labor being the difference (Donald and Doghows?) and yea you two are absolutely right....That "is" the difference. I was a kid with plenty of time on my hands 30 years ago.....Lol...
Today I do not have the time nor inclination to source parts like this by scrounging central Florida junk yards. Lots of deadly insects and snakes in Florida junk yards and I have the scars to prove it, haha..
The vendor's provide such awesome and well vetted brake kits and I say take advantage of that.

If I were doing it today, I would do the Duff kit. Easy decision for me.

But the Chevy swap, available in some form from almost all of the vendors has served me well.
 

miikee73

Shadetree Guru
Joined
Dec 14, 2010
Messages
3,551
Loc.
Aloha
I did the Tom's kit 6 years ago and was an easy job . At the time I didn't ad a prop valve but after a panic stop it was apparent it was needed. I sourced one off a 78 ford van with disc/drum. At the same time I added hydro boost with a astro HB camero MC a Lincoln dual return PS pump and a off set bracket off Ebay, Now it stops on a dime and leaves 9 cents change.
 

DonaldDouchebag

Bronco Guru
Joined
Apr 17, 2008
Messages
1,122
My issue is finding the used parts. Out here my closest salvage yard is 45 miles away and they don't have sh*t.
If I could source the used parts for $100 I figure I could be all in at $500-$600 done. The one thing not mentioned or included in most kits is the prop valve, so don't forget that! Unless your going disc disc.

A lot of guys don't run a different prop valve. I don't and I have no issues.
 

DonaldDouchebag

Bronco Guru
Joined
Apr 17, 2008
Messages
1,122
In MY opinion.....brakes and steering are the 2 most important safety issues on any vehicle. WHY anyone would want to skimp on price for questionable used parts for these systems is beyond me. It is true that not all brand new parts work perfectly and may be of lesser quality than original parts, but.....

BUY NEW and save money buying other used parts on less essential safety-related parts.

Pops

Nobody is talking about using used brake parts. The only used parts on a disc brake swap are spindles and backing plates. Those are not consumable parts that fail with use or age.
 

Skiddy

Bronco Guru
Joined
Oct 8, 2003
Messages
11,587
Nobody is talking about using used brake parts. The only used parts on a disc brake swap are spindles and backing plates.

oh man, that mean every few years we should replace all the hard parts on every vehicle%) just going by others concepts;)
 

Pops68

Contributor
Bronco Rookie
Joined
Oct 11, 2010
Messages
1,777
Loc.
Bazetta Township
DonaldD.......if spindles and backing plates are the only used parts, why even bother with them then???

Not trying to be a smartass or anything, but how much savings would there be?
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
With some area junkyards the savings might be pretty good. But not all.
Like doghows, we're not all within easy reach of one, so acquisition cost for used parts goes way up in those cases. In time and money.
And some just don't have the desire to go junkyard hopping anymore. I still "enjoy" it somewhat. But I'd buy new every time over sweating it out with a recalcitrant part in an oily gravel pit with all the wrong tools!

Around here the yards are in pretty good supply, but they don't have as many early seventies GM trucks as they used to either. So it's a crapshoot if you can even find the right stuff. It's just a narrow range of years that have the correct parts actually. Which is part of the new/used dilemma anyway.
And around here now they charge for every nut and bolt and piece of any assembly until they're almost the same as buying new anyway. So the reasons for buying used parts are getting scarcer at least here. May be the same for other large metro areas too?

I can see some of the cost coming from increased property taxes, business practices that take time and money, and the fact that here in CA (and probably more and more places) they have to be much more diligent about what they let hit the ground. Assuming a dirt/gravel base, they have to spend more money to keep it much cleaner than in some other areas with fewer restrictions, just to keep the bad stuff out of the drinking water.
Then there are the buffoons (I include myself in this sometimes) that think you need to shred the seats and headliner to get the door off or the radio out. Or bend the trunk lid in half to get to the rear window. Or cut the computer wiring harness at the firewall to take off an injector rail. So at least some of the potential profits go away from attrition.
I'm not complaining about that though. I happen to prefer good water and healthy air and plants over cheap parts. As long as it seems fair enough on the surface.

So some junkyard prices in CA then, are totally legit to be higher than elsewhere. But it still stings when a used spindle costs more than a new one! If it wasn't getting so hard to find the new ones though, I might have more of an argument against them charging more for the old stuff than I got used to paying back in the day!

Sorry for the long segué there Pops. Just sayin' that it all depends. You can still find the parts both new and used. Just need to find out if one is better for you and if it's cheaper too.
Around here and in a lot of areas, new parts look like a good choice.
Of course, that's easy for me to say. As always!;)

Paul
 

Pops68

Contributor
Bronco Rookie
Joined
Oct 11, 2010
Messages
1,777
Loc.
Bazetta Township
Paul: I bought a complete kit from a guy in Pa. - on the way to my cabin - not sure where he got it, he couldn't remember and nothing was on the boxes. I bought new Warn premium hubs and had everything in one foul swoop. I think it was under $600 2 years ago. Bought my complete power steering set up new, too.

I got my NV3550 from a Jeep boneyard and saved over half the cost of a new one. So, I too buy used parts - Mustang seats, Mustang hydroboost, etc. etc.

I guess it comes down to how much $$ is saved verses the involvement in getting whatever part/system together.

Got my retro tach/cup/billet mount from WH the other day. Need it to quit raining for a few days so I can install that and do some more on the Bronco.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Yeah, we finally have some Bronco-work compatible weather around here.
Hear you all are having a time of it. But the "cold rain" they're gettin' more east of you is not fun either. Even with a heated garage!

And more of them Texas-sized hail storms down thataway. Guess I shouldn't complain about having sunny and warm at the wrong time. At least it was perfect for our Roundup today!

Paul
 
OP
OP
joebronco73

joebronco73

Contributor
Full Member
Joined
Mar 16, 2009
Messages
276
Loc.
Lago Vista, TX
Wow...it sounds like I opened a can of worms! ;D

I think a lot of what has been said is reasonable though. I have heard both horror stories of trying to piece kits together and success stories of finding everything for unbelievable deals. I think I will stick with a bought kit that I can put on myself, but for the sake of spending money within the bronco community and for the time constraint. If I was building a frame-off restomod, I'd probably take the time to pick through the salvage yard to make a dependable, easy to maintain setup.Regardless, I appreciate the input. This has given me a lot to work with and helped me decide on what is worth the cost/time...again, I'm glad you're all on here!
 

Joe473

Sr. Member
Joined
Jul 16, 2012
Messages
958
Wow...it sounds like I opened a can of worms! ;D

I think a lot of what has been said is reasonable though. I have heard both horror stories of trying to piece kits together and success stories of finding everything for unbelievable deals. I think I will stick with a bought kit that I can put on myself, but for the sake of spending money within the bronco community and for the time constraint. If I was building a frame-off restomod, I'd probably take the time to pick through the salvage yard to make a dependable, easy to maintain setup.Regardless, I appreciate the input. This has given me a lot to work with and helped me decide on what is worth the cost/time...again, I'm glad you're all on here!
No need to pick through a salvage yard. BC'S kit uses new knuckles brackets etc that are similar to 77. All consumable parts are 76 77 unless you upgrade to Heavy duty t bird calipers.

Sent from my SM-G900V using Tapatalk
 
Top