• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Disk/Drum Braking issues

lonicus

Full Member
Joined
Dec 27, 2009
Messages
267
Loc.
Costa Mesa
I have a chevy front disk/stock rear system powered by a Vac booster. Prior owner installed the system and I have never had very good braking, but need to get this sorted once and for all! The truck will stop, and under normal conditions the brakes are fine. However if you need to stop quickly, it wont. It's like it reaches a braking limit, and then says,"OK that's enough, no more stopping power"

I thought it was my booster - which was cracked so I replaced it. However that did not fix the problem.

So I jacked up each wheel to see how the individual brakes are working. BOTH rear brakes are essentially useless. at full pedal pressure I can still move the wheel by hand (the brakes are applied, it resists me, but I should not be able to turn the tire by hand)

The fronts are better in that I can't turn by hand. However I don't trust at this point that they are getting full braking power either.

Something is clearly wrong in the rear. any ideas on what the problem is? (I did adjust the brakes, didn't help)
 

Skiddy

Bronco Guru
Joined
Oct 8, 2003
Messages
11,587
what kind of shape are the rear shoes, does your ebrake work?
 

B RON CO

Contributor
Bronco Guru
Joined
Jun 29, 2016
Messages
2,484
Loc.
Statesville, NC
Hi, hard to tell but you could check the rear wheel cylinders. I have seen wheel cylinders where one or both pistons are stuck, and they did not leak. Also remember the small primary shoe goes to the front, and the larger secondary shoe goes to the rear. Good luck
 
Top