double lip seal dana 20 adapter

[savage]

Iam rebuilding my dana 20 transfercase. when I took out the seal in the bearing retainer thats in the adapter.The seal that I ordered is not a double lip seal.seal number on new seal is 13705.I called the bronco place and they said it was a double lip seal.The seal that came out of the adapter has two lips and each lip has a spring.The seal I recieved has one lip and one spring and a small thin lip with no spring.Should I use it or get one that matches the old one?

 

[Viperwolf1]

Wrong seal. You probably won't be able to get it in without distorting the one-sided shell. Get a CR #517383, SKF #18676, or Timken #473179.

 

[NYLES]

Wrong seal. You probably won't be able to get it in without distorting the one-sided shell. Get a CR #517383, SKF #18676, or Timken #473179.

unreal!!!!!!

 

[DirtDonk]

The one we use is the 18676 that Viper mentioned.
If we sent that one to you savage, then either the wrong one was in the box or a change has been made to the design we weren't aware of.

Let me know if that's from us and we'll take care of it if we can.

Paul

 

[xcntrk]

What is the right seal here? I've used both the double lip and the single lip with retention spring - both still allow the D20 to leak a little...

 

[savage]

It was not Wildhorses....I actually ordered the right one from Wildhorses....I don't want to mention the other place by name....but won't be using that other place again....thanks Paul!!!!!