• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

drum to disk swap question

70sbudget

Jr. Member
Joined
Jun 1, 2017
Messages
92
can the drum dana 30 axle be used as a base for the knuckles off of a 79 bronco dana 44 disk?
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
No.
The inner Cs and knuckles are different sizes, they do not interchange between a Dana 30 and a Dana 44, also the Bronco Dana 30 is a king pin design and the Bronco Dana 44 is a ball joint design.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
No (again)
Only disk conversion for a 30 is a spindle out (GM style) conversion.
Kingpins don't interchange with any disk brake knuckles (on the 30)
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
But don't fret the GM conversion works really well. It is uber easy and cheap.
I have been running it for 25+ years.
Read about in a Peterson's 4 Wheel Drive in the early 90's.
 
Top