• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Eco-Boost Engine swap?

Gforce

New Member
Joined
Jul 29, 2013
Messages
3
I have a 71 with a built 302 and a 69 with a lonely engine bay. I'm thinking hard about (trying) putting a 2012 ecoboost motor and drivline in. Has anyone done it? What should I think about before moving forward?
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Id think about the fact that the setup has very little support in the aftermarket yet and very few people have dones these swaps yet. You must also consider that the drive train may not fit so you may need adapters and such to shoehorn it in there. I dont know how many systems are tied into the computer but like a lot of the new stuff almost everything is tied in so it may take a lot of work to get things working correctly.
All said and done I dont see much benefit to the ecoboost in a bronco other than power from a small engine even then you will be boosting most of the time. Fuel mileage is not there even in the F150's and will be even less in a brick like bronco. Just my .02
 

Broncitis

Sponsor/Vendor
MEB Founder
Joined
May 18, 2004
Messages
5,283
What should I think about before moving forward?

A cool modern turbo diesel ;D

I'd love to get more details (dimensions, weight, etc.) on some of the newer diesels or ones coming out soon, such as:

Jeep's new 3.0L with hi/lo 4x4 and eight speed auto.

Dodge Ram 1500 3.0L I4 EcoDiesel with eight speed auto (should be 4x4 version available as well for possible entire driveline swap?)

Ford 3.2L Power Stroke with six speed auto (out of the new full size Transit Van, so no factory 4x4)

Mercedes Sprinter BluTEC 3.0L with 5 speed auto

One of the many VW/Audi/Porche TDI enines (V6, or V8 or if you are really looking for something wild the V10 or very pricey V12 (not likely either of these would probably fit without major movement of the firewall). The V12 puts out 493bhp and 737lb ft of torque while getting ~25 MPG in the Audi Q7, however, the engines are rare as hell and super pricey, but if money were no object like a few select Bronco builds I have seen being done...

http://www.youtube.com/watch?v=o4RT519LVrY

However, the Eco-Boost is likely way more practical than any of these, but I think the cool factor of a modern turbo diesel that does not sound like a Farmall would be sweet. I'm really hoping that new Jeep 3.0L measures up to be a possible fit and comes with the Rubicon package eventurally for an extra low T-case. If that entire driveline could be pulled from a wreck in a few years at a reasonable price, that could be a bad ass setup for a Bronco IMO.

You might want to check with Modman who is on here. He has done more modern engine swaps into Broncos and other vehicles than anyone else on here that I know of. I am sure he has already given thought to this.

All the computer controls, sensors, etc. on these (especially when mated to these newer transmissions as well) is what scares me about these swaps. It is hard enough just making everything mechanically mate and fit, then you have to add all this extra stuff which to me is even more daunting.

I'm with Naz, for a gas motor, I think I would probably choose something else like a Coyote for a cool engine. There have been a few done and there will likely be way more support for that. If you are looking purely for MPG, maybe a Prius hybrid swap?;)
 
Last edited:

broncodriver99

Bronco Guru
Joined
Jan 27, 2008
Messages
4,780
Loc.
Glen Allen, VA
What did you try to make work?

I said it would be cool, but never said easy!;D

I came across one of the South American 2.8 Powerstrokes a few years ago. Adapted it to an N3550 and had to chose between hacking up the frame or the body. Neither was acceptable. So, I sold it to a Land Rover guy which was where it was intended to go anyway. It was basically a reworked 300tdi but so much better. Only 135 HP but 300 ft/lbs of torque at 1400RPM out of a 4 banger. Would have been awesome.

Know anybody that needs a bunch of UK specific LR parts?
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
I have a 71 with a built 302 and a 69 with a lonely engine bay. I'm thinking hard about (trying) putting a 2012 ecoboost motor and drivline in. Has anyone done it? What should I think about before moving forward?

There are a few threads on it. The search button filled with "ecoboost" should work to answer many questions.

In short, it isn't going to be an easy swap. But with a big enough shoe horn anything will fit. I have seen an Allison V12 WWII fighter engine in a Mescherschmitt micro car. The engine was as big as the car, but it fit, and was totally useless.
 
OP
OP
G

Gforce

New Member
Joined
Jul 29, 2013
Messages
3
Thanks for all the great comments. This is my first time on here so it's cool to see how active the community is. All things considered I'll probably go with the Prius idea.;)
 

EFI Guy

TheEFIguy@gmail
Joined
Apr 14, 2013
Messages
1,168
Loc.
BFE
The biggest issue is lack of support for the PCMs at the moment. Since it is a CAN network vehicle, all of the different modules are dependent on each other to operate correctly. Instead of much of the sensor data being sent analog over individual wires, a lot of it is sent digitally over the network.

You could try to do a stand alone engine controller via Megasquirt, but I bet you would spend thousands of hours trying to get it to run as good as Ford does. Then there is transmission control, that's a whole different animal....

In a few years, the aftermarket will start to catch up and it will be do-able. But for right now, you'd be better off making an EB body kit and putting it on your Ecoboost donor.
 
OP
OP
G

Gforce

New Member
Joined
Jul 29, 2013
Messages
3
The computer and electronics is what stopped me from trying thus far. Not my strong area.
 

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
Better to go with one of the new modular motors with standalone EM. If you pull a power plant and management system from an existing platform, much of the computer and electronics is unique to the vehicle. ABS integration, transmission and TCU integration, and other misc vehicle sensors could keep the motor from running properly as the computer is searching for these absent components.

A modular motor with standalone EM is stripped of all this additional BS and only contains the components required for the engine to operate. All said and done you could probably go with a new Coyote 5.0 including all EM for cheaper and less complexity then sourcing an Ecoboost and making it work.


PS: I can’t wait to see the new Jeep 3.0-liter turbo-diesel V-6. Producing 240hp and 420lb-ft of torque coupled with their new 8-speed tranny is going to be slick!
"VM Motori Cento in Ferrara, Italy, produces the engine, which will be marketed under the EcoDiesel name. It features a block of compacted graphite iron and aluminum twin-cam heads. Basic specs for the 60-degree six include common-rail injection, downstream emissions treatment via urea, a 15.5:1 compression ratio, and ceramic glow plugs so quick to heat up they might well consign mentions of glow plugs to history."
 

elateok

New Member
Joined
Feb 23, 2011
Messages
2
I came across one of the South American 2.8 Powerstrokes a few years ago. Adapted it to an N3550 and had to chose between hacking up the frame or the body. Neither was acceptable. So, I sold it to a Land Rover guy which was where it was intended to go anyway. It was basically a reworked 300tdi but so much better. Only 135 HP but 300 ft/lbs of torque at 1400RPM out of a 4 banger. Would have been awesome.

Know anybody that needs a bunch of UK specific LR parts?

I’m looking for the jumper seats… if you have some id take em.
 

elateok

New Member
Joined
Feb 23, 2011
Messages
2
A cool modern turbo diesel ;D

I'd love to get more details (dimensions, weight, etc.) on some of the newer diesels or ones coming out soon, such as:

Jeep's new 3.0L with hi/lo 4x4 and eight speed auto.

Dodge Ram 1500 3.0L I4 EcoDiesel with eight speed auto (should be 4x4 version available as well for possible entire driveline swap?)

Ford 3.2L Power Stroke with six speed auto (out of the new full size Transit Van, so no factory 4x4)

Mercedes Sprinter BluTEC 3.0L with 5 speed auto

One of the many VW/Audi/Porche TDI enines (V6, or V8 or if you are really looking for something wild the V10 or very pricey V12 (not likely either of these would probably fit without major movement of the firewall). The V12 puts out 493bhp and 737lb ft of torque while getting ~25 MPG in the Audi Q7, however, the engines are rare as hell and super pricey, but if money were no object like a few select Bronco builds I have seen being done...

http://www.youtube.com/watch?v=o4RT519LVrY

However, the Eco-Boost is likely way more practical than any of these, but I think the cool factor of a modern turbo diesel that does not sound like a Farmall would be sweet. I'm really hoping that new Jeep 3.0L measures up to be a possible fit and comes with the Rubicon package eventurally for an extra low T-case. If that entire driveline could be pulled from a wreck in a few years at a reasonable price, that could be a bad ass setup for a Bronco IMO.

You might want to check with Modman who is on here. He has done more modern engine swaps into Broncos and other vehicles than anyone else on here that I know of. I am sure he has already given thought to this.

All the computer controls, sensors, etc. on these (especially when mated to these newer transmissions as well) is what scares me about these swaps. It is hard enough just making everything mechanically mate and fit, then you have to add all this extra stuff which to me is even more daunting.

I'm with Naz, for a gas motor, I think I would probably choose something else like a Coyote for a cool engine. There have been a few done and there will likely be way more support for that. If you are looking purely for MPG, maybe a Prius hybrid swap?;)




i just got the ram 1500 eco diesel last week and this engine must go into my 74 bronco… the thing is amazing and the low end power is impressive .. i need to find some one who can do this … I’m in love all over again. it will be like a boob job on my already hot girlfriend.
 

Broncitis

Sponsor/Vendor
MEB Founder
Joined
May 18, 2004
Messages
5,283
i just got the ram 1500 eco diesel last week and this engine must go into my 74 bronco… the thing is amazing and the low end power is impressive .. i need to find some one who can do this … I’m in love all over again. it will be like a boob job on my already hot girlfriend.

Check with Van Tumblin at Tumblin Automotive in SC. He has probably done a wider variety of swaps into EB's than anyone else. 5.0, 4.6 mod, 7.3L PowerStroke, Coyote, etc.

Rumor has it that a 12v Cummins in an EB is soon to be on the work schedule as well.
 

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
I can't even get my 3.5L EcoBoost to run right in the F150 for which it came from factory... No way could you run one standalone in a custom application and be happy with it.
 
Top