Emergency brake cable adjuster

[Yeller]

Need a little help. Installing replacement ebrake cables. I’m down to the adjuster/splitter from 1 cable to 2. Here’s what I have, what am I missing? The cable from the pedal appears to be missing something or I’m missing how it hooks up. Any ideas?

 

[SteveL]

Looks like the parts are there. It's been a while. Does the cable slide thru a hole in the end of the bar then slide over to the v-cut?

 

[Broncobowsher]

From the bolted on tab for the single cable, looks like you are modifying some parts. What all have you done?

 

[Yeller]

Nothing other bolt the bracket back on, owner forgot to weld it on during panel replacement. Tub is coated and done so didn’t want to redo that, opted to bolt on. I’m installing provided parts on an assembly that I’ve never seen complete, I’m not seeing how the cable connects to the transfer bar.

 

[75MIKE]

You're missing this spring that keeps every tight once you release the brake. Pedal cable slides into the groove on top of your bar and the spring keeps tension on to hold the ferrule on the end of your cable in the notch.

https://www.tomsbroncoparts.com/product/emergency-brake-return-spring

 

[Yeller]

Thanks guys, had the spring, just wasn’t in the pic. Got a pic from a member and now understand.