• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Engine Fan recommendations needed

JohnJohn

Contributor
Bronco Guru
Joined
May 6, 2005
Messages
2,179
Loc.
Richmond
I am tired of dealing with my two speed electric fan and blown relays. I want to run a standard engine fan. Any recommendations?
It is for my trail rig. I am running a 302 EFI serpentine system.
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
Whatever came stock on the serpentine system your running. Change to an Explorer set up or try these. I haven’t been able to find a mechanical fan that fits in my set up without hitting the hood (engine is raised to clear the D60) and went to these relays and my problems went away.

https://www.amazon.com/Ehdis-Truck-Normally-Socket-Automotive/dp/B01KFKDZ60/ref=mp_s_a_1_2_sspa?dchild=1&keywords=70+amp+relay&qid=1601084792&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzTkFJN1JLRjdET0NOJmVuY3J5cHRlZElkPUEwMzI2ODg3TldaV0dJTTNBVkpXJmVuY3J5cHRlZEFkSWQ9QTA0MDEwMzQyTjlDTEtKQ1U1RURCJndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
 

tatersalad

Bronco Guru
Joined
Jan 17, 2009
Messages
1,067
Re

Whatever came stock on the serpentine system your running. Change to an Explorer set up or try these. I haven’t been able to find a mechanical fan that fits in my set up without hitting the hood (engine is raised to clear the D60) and went to these relays and my problems went away.

https://www.amazon.com/Ehdis-Truck-Normally-Socket-Automotive/dp/B01KFKDZ60/ref=mp_s_a_1_2_sspa?dchild=1&keywords=70+amp+relay&qid=1601084792&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzTkFJN1JLRjdET0NOJmVuY3J5cHRlZElkPUEwMzI2ODg3TldaV0dJTTNBVkpXJmVuY3J5cHRlZEFkSWQ9QTA0MDEwMzQyTjlDTEtKQ1U1RURCJndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

At 80 amps I would think not
 

rguest3

Bronco Guru
Joined
Dec 13, 2012
Messages
3,780
Mustang EFI Serpentine?

A 1/2" spacer and a 17" mechanical fan with Reverse Rotation should work great. The EFI original Fan /Clutch set up will be too long and hit the radiator.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
The go to accessory drive for the past decade has been the Explorer setup. Has a real good fan. Not right against the core so with a proper fan shroud there is plenum space so it pulls air better then when the fan is nearly touching the core. It has been done so many times all the tricks like a smaller idler pulley are known. Stock power steering pump is usually good, just need the correct line adaptor from Lee's and not the universal one.
 
OP
OP
JohnJohn

JohnJohn

Contributor
Bronco Guru
Joined
May 6, 2005
Messages
2,179
Loc.
Richmond
It looks like I have maybe 3.5" from the face of the water pump pulley to the radiator.
I will look for a clutch fan but I may have to just go with a standard fan. It looks like Wild Horses has a reverse rotation 18 fan. I need to see it it will bolt on my setup then shop for a shroud.
I have a 2" body lift and remember one of the vendors had a shroud that would accommodate a body lift.
 
Top