AussieBronco
Jr. Member
- Joined
- Jun 10, 2009
- Messages
- 59
My engine is vibrating to the stage where it shakes the whole Bronco. The engine is new in the Bronco being a 5.0 out of a Thunderbird. When I did the conversion there were no vibrations, and then it appeared after about 2 months of driving and gradually got worse (I think). So I thought it was possibly the clutch or the flywheel bolts from when I put the new flywheel on (T'bird was an auto) as I didn't use any lcoktite. I just removed the transmission, clutch and flywheel and nothing looks out of sorts here.
When I got the engine I never pulled it down, rather thought I'd just see how it went. When the car is in neutral it still vibrates as when I have my foot on the clutch so I don't think it is the transmission (NP435). Does anyone have any ideas or recommendations on what might be the problem and where I should go from here? Thanks
When I got the engine I never pulled it down, rather thought I'd just see how it went. When the car is in neutral it still vibrates as when I have my foot on the clutch so I don't think it is the transmission (NP435). Does anyone have any ideas or recommendations on what might be the problem and where I should go from here? Thanks