jjjjjgrant
New Member
351 W 1995 roller cam engine, I pulled it out of a running bronco, engine was supposedly 90k miles and installed in the 95 bronco, then trans went out. The engine ran good, but if anyone is like me, even though i know it ran fine, i would pull the pan, replace oil pump, check bearings etc. I was going to put a e303 cam in it and put in my 78 ford. has all the fuel injection and serp belt stuff. $650.00
mid 70's 302 with a NP435 behind it, in a 78 f150 2wd. engine should run, carb is off, i consider it a rebuilder, but likely it may run decent. trans is supposed to be good. i'd take 400.00 for both.
1969 390 engine (runs decent) headers, C6 automatic, in 69 f100 $500.00 for engine and trans.
np435 4 speed, married to np205 transfer case $500.00 good condition
404-732-6550 call/text
mid 70's 302 with a NP435 behind it, in a 78 f150 2wd. engine should run, carb is off, i consider it a rebuilder, but likely it may run decent. trans is supposed to be good. i'd take 400.00 for both.
1969 390 engine (runs decent) headers, C6 automatic, in 69 f100 $500.00 for engine and trans.
np435 4 speed, married to np205 transfer case $500.00 good condition
404-732-6550 call/text