Explorer Serpentine Conversion - PS pulley

[1969miller]

I wish you guys would bring back the bracket for the sag/serpentine system for use with a 351w/5.8

This bracket bolts to the cylinder head and can be used with the explorer front dress on a 351W
https://www.wildhorses4x4.com/power-steering-pump-bracket-96-01-explorer-5-liter

 

[bigmuddy]

Wait a minute. Did they remake these to work with the 351w? The previous unit I was told wouldn't work at all with the 351w. Weird, ok well I will give it a shot then!
Thanks much!

 

[WILDHORSES]

Wait a minute. Did they remake these to work with the 351w? The previous unit I was told wouldn't work at all with the 351w. Weird, ok well I will give it a shot then!
Thanks much!

There is a different version that is 289/302 only. Not to confuse the issue but it's relevant.
https://www.wildhorses4x4.com/early-bronco-power-steering-pump-brackets-explorer-5-liter

With the unit Miller has linked you can add an A/C bracket if you like.
https://www.wildhorses4x4.com/sanden-sd7-ac-compressor-bracket-96-01-explorer-5-liter

Jim

 

[bigmuddy]

Thanks Jim, good to hear.

I already have the AC bracket when I purchased the wrong PS bracket earlier this year.

Appreciate the help and feedback.

 

[kman67]

There is a different version that is 289/302 only. Not to confuse the issue but it's relevant.
https://www.wildhorses4x4.com/early-bronco-power-steering-pump-brackets-explorer-5-liter

With the unit Miller has linked you can add an A/C bracket if you like.
https://www.wildhorses4x4.com/sanden-sd7-ac-compressor-bracket-96-01-explorer-5-liter

Jim

This is good info. It looks like I got the 5.0 2029 bracket for my 351w and not the 7129. I'll be giving you guys a call to order the right one.
Thanks
Kyle

 

[bigmuddy]

This is good info. It looks like I got the 5.0 2029 bracket for my 351w and not the 7129. I'll be giving you guys a call to order the right one.
Thanks
Kyle

Same thing I did earlier this year.