• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

EZ - 1973 Bronco Questions

EB70

Sr. Member
Joined
Jun 9, 2006
Messages
730
Good morning,

I have some morning EZ coffee type of questions......EZ:)

Currently I am looking at a 1973 EB. I asked if it had a Dana 44, he said they were rare as hens teeth and that they were an option.

I say that every 71 and newer (or 71.5) should have a 44 from the factory and the 30 died well before.

So, were there any factory Dana 30's offered after 1971?

Also, is it possible to have power brakes without the disks?

Lastly, likely gear ratios for a 3-speed, with a factory 302 stripper Bronco?

Thank you,

Rob
 

g8rb8t

Bronco Guru
Joined
Feb 23, 2008
Messages
1,489
Yes, possible for power brakes without disks. I've got the opposite too, front discs and manual:cool:

Will leave the other questions to the experts.
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
No D30 after '71.

Power brakes was an option starting in '76. At the same time front disk brakes became a standard feature.

3.50 was the standard axle gear with a V8. 4.10 was the only option.
 
OP
OP
E

EB70

Sr. Member
Joined
Jun 9, 2006
Messages
730
OK. I didn't want to argue with him. He is selling it and is older. He never ran big tires etc. so he probably didn't care. However, for me I want the 44 and it is a selling point to me.

It looks like a stripper Bronco which is fine.
 
Top