vanolefan
New Member
Sometimes I hate this Bronco! I will admit I am not a master mechanic, actually really not a great mechanic at all. After addressing a number of issues this weekend, I was finally ready for a test drive around the neighborhood. She was warming up in the drive way when she blew another freeze plug. Worst of all it was the one directly behind the motor mount on the drivers side. I was able to extract the old rusted out freeze plug with a lot of effort, but putting a new one in will not be so easy.
I removed the bolts to the motor mount and I am thinking about jacking the engine up to remove the motor mount to get better access to install a new plug. Where do I jack up the motor? I tried under the harmonic balancer, but it didn't seem to raise the drivers side. Can I jack up the engine by the oil pan?
Alternatively, I have considered a rubber expandable plug. I have heard some use them with success and others say they don't hold up. Any thoughts?
I removed the bolts to the motor mount and I am thinking about jacking the engine up to remove the motor mount to get better access to install a new plug. Where do I jack up the motor? I tried under the harmonic balancer, but it didn't seem to raise the drivers side. Can I jack up the engine by the oil pan?
Alternatively, I have considered a rubber expandable plug. I have heard some use them with success and others say they don't hold up. Any thoughts?











