Front Bump Stop Installation

[doran4x]

I just installed F250 shock towers and new Fox shocks with 12" travel.

The uptravel of my current 4 1/2" suspension setup is about 4" with the Dana
44HP, at which point the driveshaft contacts the transmission bellhousing.

I need to install bump stops (looking at Fox or King)but am not sure where to
mount or how long to get.

Any input is greatly appreciated.

Thanks,

Tom

 

[Pokey71]

On the bottom of the frame over the radius arms. You should be able to dial it in from that point.

 

[doran4x]

I assume I would need to fab a plate to weld to the radius arm.