• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

fuel gauge problem

gumbydood

Jr. Member
Joined
Jul 5, 2009
Messages
81
My fuel gauge failed sometime yesterday... was working fine and now nothing. Newer IVR and the alt gauge quivers with the key. Haven't gotten out any meters or anything yet...
What should the ohms be at appx 1/2 tank (single tank, 11 gal)?
What voltage should be coming out of the IVR?

Any other suggestions as to what I should be checking... or just carry spare fuel at all times?
Thanks,
G'dood
 

kyle

Bronco Guru
Joined
Nov 2, 2001
Messages
2,199
Probably the sending unit. It supposed to be in the neighborhood of 35 ohms 1/2 full if I recall correctly.
 
OP
OP
G

gumbydood

Jr. Member
Joined
Jul 5, 2009
Messages
81
Well, I went out and fu..... um, messed with everything. Sending unit was working but still no fuel gauge... disconnected and reconnected everything... wiggled some stuff and presto!!! it works.

God I love 40 year old wiring...

G'dood
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
Actually 23 ohms is half scale. It's a log scale. Ammeter is totally separate and unrelated. Voltage will be a pulsing 2-9V. Look for a bad ground at the sender or bad wire going to the sender.

Sometimes the switch gets flakey. Spray it out with some contact cleaner.
 

oleguy74

Contributor
Bronco Guru
Joined
Mar 26, 2008
Messages
2,034
Loc.
calif city ca
gauges

this will help...
 

Attachments

  • 001.jpg
    001.jpg
    68.5 KB · Views: 102

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,782
check your wires coming over the d20 support, mine were worn through there.
 
Top