• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Fuel gauge problem

oldpaths

New Member
Joined
Jan 13, 2013
Messages
14
Loc.
Bluff City TN.
Fuel gauge pegs past full at start up, drive about 5 minutes and it drops to empty.
Has anyone had this same issue and maybe can save me some trouble shooting?
The gauge and sending unit are only about a year old.
Thanks for any info. in advance
 

Oldtimer

Contributor
Jr. Member with Sr. moments
Joined
Feb 4, 2005
Messages
1,801
Loc.
Sunnyvale, CA
I would start with the IVR, bolted to back of speedo cluster.
12 volts in, 6ish volts out, needs to be grounded to cluster, which needs a good ground to dash.

1699474630505.png


 

56f100bbw

Contributor
Bronco Guru
Joined
Feb 3, 2008
Messages
2,406
Loc.
Tucson / lakeside AZ
OP
OP
oldpaths

oldpaths

New Member
Joined
Jan 13, 2013
Messages
14
Loc.
Bluff City TN.
I would start with the IVR, bolted to back of speedo cluster.
12 volts in, 6ish volts out, needs to be grounded to cluster, which needs a good ground to dash.

View attachment 913583

[/URL][/URL]
Thanks bud, I'm pretty sure I changed that about a year or so ago when I put the dash back in (I know I bought one for some reason).
Let me ask this.......could that little IRV become defective if a fellar accidently shorted the battery post with a pair of pliers? because I did accidently spark out on the fender while tightening the cable just before I noticed the gauge problem.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Probably. But aside from that, modern parts don’t last as long as they used to.
They can, and they might. But they don’t always… So we can never assume anymore.
We have to test.

Measure voltage going into the IVR, and coming out of the IVR.
 

BroncoJimbo

Contributor
Long-term owner
Joined
Jun 11, 2014
Messages
291
Loc.
North GA
Check your ground at the sending unit. Mine behaves like that occasionally and I have to take the wire off and clean under it.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
If it’s a recurring theme, perhaps the next time you clean it up and reattach it, you can do a quick spray paint job over the top of it.
Just something to keep moisture, air, and the ensuing corrosion at bay.
Be a good experiment anyway.
 
OP
OP
oldpaths

oldpaths

New Member
Joined
Jan 13, 2013
Messages
14
Loc.
Bluff City TN.
Thanks bud, I'm pretty sure I changed that about a year or so ago when I put the dash back in (I know I bought one for some reason).
Let me ask this.......could that little IRV become defective if a fellar accidently shorted the battery post with a pair of pliers? because I did accidently spark out on the fender while tightening the cable just before I noticed the gauge problem.
I would start with the IVR, bolted to back of speedo cluster.
12 volts in, 6ish volts out, needs to be grounded to cluster, which needs a good ground to dash.

View attachment 913583

[/URL]
This fixed it, thanks a lot!
 
Top