• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Full length axles

buckenbronco

Full Member
Joined
Apr 19, 2011
Messages
153
Loc.
Hanson
Anyone have any info on full length axles on how they ride? I'm going to running 35 inch tires with a long arm duff 3.5 in suspension and a 2 inch body. Mainly an on road bronco but when I do go off road I want it to be solid. So will the bronco be more stable on the road? And what will be the pros and cons? Thanks
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
Full width (one tons) with 5.5" lift (all suspension) and 37's - loved the looks of this combo.

IMG_20130526_125017_zpsfc0505d4.jpg


IMG_20130526_124958_zpsf980bf18.jpg
 
OP
OP
B

buckenbronco

Full Member
Joined
Apr 19, 2011
Messages
153
Loc.
Hanson
Why do some of the full length axles look like they stick way out when others only stick out only a little bit
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
Differences in wheels. Less width and or more back spacing make it narrower. There is also a difference in axle widths a full width D44 from a 70's F150 is 3" narrower than an axle from f350
 
OP
OP
B

buckenbronco

Full Member
Joined
Apr 19, 2011
Messages
153
Loc.
Hanson
If i Don't want the axles sticking way out what would you recommend for axles. I like the idea of more stability and the look of it just a hair wider. I'm mainly an on road driver
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
Most would just recommend wheel spacers of different offset wheels. I am not a fan of that most of the time. You need to be aware of a few more thing in front end geometry besides just the basics. Scrub radius is a big one. In short, draw a line through the ball joints to the ground. That should pass through the tires contact patch. Maybe not dead center, there are various factors in play. But the tire should not be too far away from it.
 
Top