• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Full-Width Swap Questions

SloppyDawg71

Jr. Member
Joined
Oct 25, 2006
Messages
147
Loc.
Cedartown, GA
I have recently completed a full width swap and I need a track bar. My question is what is the length for a trac bar- approximately? could I use a EB extendable bar or do I need a full size bronco trac bar cut down maybe?
 

BroncoDawg

Sr. Member
Joined
Mar 4, 2005
Messages
672
Loc.
Bishop, CA
For starters, you want the trackbar as close to parallel as possible and the same length as the drag link to avoid bump steer. Cutting down the FSB one will likely be easier.
 

gearhead74

Jr. Member
Joined
May 5, 2004
Messages
78
Loc.
Tri-Cities, WA
I used a '76 F150 D44 HP, I used a wild horses adjustable trac bar and built the lower mount (on the axle), James duff drop bracket on the frame side.
 

nik

Sr. Member
Joined
Dec 3, 2007
Messages
617
Loc.
Corcoran, CA
As close to the length of the drag link as possible. making your own might be the easiest route. mine is straight and adjustable with a heim at frame end and a poly bushing at the other. it's connected at the stock location on the fw d44 and to a a drop bracket I fabbed that moves the mounting point on the frame down and outwards.
 
Top