• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Fusor Seam sealer

rjcruz27

Sr. Member
Joined
Dec 2, 2014
Messages
369
Has anyone ever used Fusor Seam sealer with a caulking gun and over primer. Just scored some free seam sealer but I’ve already primed my tub
 
OP
OP
R

rjcruz27

Sr. Member
Joined
Dec 2, 2014
Messages
369
This is what I got
 

Attachments

  • 55B90669-C78F-4F54-87E7-C11B01765F6A.jpeg
    55B90669-C78F-4F54-87E7-C11B01765F6A.jpeg
    52.3 KB · Views: 183

jmangi62

Bronco Guru
Joined
Jul 28, 2013
Messages
2,512
Never used that stuff before, but I would clean the area then apply this. You don't want anything to contaminate and come loose over time, and I always use a 3m product if I can. Just my .02 good luck. :cool:
 

Knox

New Member
Joined
Jul 17, 2006
Messages
33
LORD makes a lot of good products we use their elastomeric bearings in the helicopter main rotor and tail hub assemblys
 

Justafordguy

Bronco Guru
Joined
Sep 26, 2009
Messages
6,255
I used the Lord Fusor seam sealer in the rain gutters when I restored my hard top. I applied it over POR 15. That was 8 years ago and it has held up very well.
 

bknbronco

Bronco Guru
Joined
Jan 17, 2011
Messages
4,388
Loc.
North Metro, MN
i always use LORD FUSOR. And in the caulking tube like in the picture. 5 years ago i had to prime and then seam seal beacuse the LORD product had to go over primer. I couldnt find that kind and i think it got replaced with LORD FUSOR DTM (direct to metal), so the other day i sealed between my glass tub and my glass speaker encloseres. Not bare metal but turned out sweet.

I think since your going over primer your good to go. If it was bare metal id make sure its the LORD DTM.

Excellent product and super easy to use in the caulking gun tubes. if you need to smooth it out just spit on your finger and smooth er out.

good luck and have fun.....i just finished spraying raptor on the inside of my tub after spending 3 weeks sanding and preping.
 
Top