• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

hand E-Brake.

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
... It's been a couple of years since We've talked about adding A Hand lever from the wrecking yard finds.. Any new thoughts on a hand break. For our E-Brakes .. I'd sure like to have one.. I don't want to redo the foot brake pedal.
.. Seems like the Jeep Cherokees.
 

ntsqd

heratic car camper
Joined
Jan 30, 2005
Messages
5,970
Loc.
Upper SoKA
Used the hand e-brake assembly out of a Fiero for mine. Put it btwn the seats next to the console, but with the Fiero part I could have put it on the left of the driver's seat had the seat been a little more to the right.
EDIT: I did use a stock replacement Bronco front cable, coiled in a single turn loop, with the Fiero hand lever.
 
Last edited:

Crush

Contributor
Bronco Guru
Joined
May 30, 2007
Messages
3,463
Loc.
Greenbottom, WV
Early mustangs had one that was a pull out under the dash. Then you twisted it to release it. Should be able to use the same cable. I have also seen people use the floor mounted hand brake out of later model mustang and aerostar bans but thisnrequires modification to the floor and different cables
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,223
This is an interesting article about putting a 80s-ish Mustang floor mounted parking brake in an early Mustang. http://dazecars.com/dazed/e-brake.html

The guy who made the site engineers a ton of his own stuff and it's very impressive, might help with the EB conversion

That's the same lever assembly that's in my truck - my dad did the mod to ours in the 1980s after the stock lever assembly kept breaking.

Todd Z.
 
OP
OP
Pa PITT

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
.. Wow Todd I remember someone putting a pull lever under the dash into a Bronco years Ago..
... Your Story may be the one I remember.
 

nrramse

Sr. Member
Joined
Apr 20, 2008
Messages
537
I always thought that old school bus e-brakes had potential, but I don't know anyone that's tried it. See pic below (the lever with the string tied on),
img_6686-large.jpg
 

ntsqd

heratic car camper
Joined
Jan 30, 2005
Messages
5,970
Loc.
Upper SoKA
Those were usually an external band type drum brake. The lever was directly attached to the band contracting mechanism. I've been around them for years, but never really paid much attention to how well they worked.
 

krause

Jr. Member
Joined
Jul 20, 2013
Messages
113
This is something completely different but an idea ive been tossing around to control a transfercase driveline disc brake. Its an electronic ebrake and they are getting very popular from street rides to trail rigs.


http://www.estopp.com/#!about/c1x9v
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,223
.. Wow Todd I remember someone putting a pull lever under the dash into a Bronco years Ago..
... Your Story may be the one I remember.

I should have been more clear - I meant that a pull handle on the floor was installed on mine years ago.

Todd Z.
 
OP
OP
Pa PITT

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
... OK Keep thinking Guys. I'd like an E-Brake.. I'd rather not kill my diesel at each gate .. But most are at a sloop..
 

lilthom

Contributor
Bronco Guru
Joined
Nov 29, 2005
Messages
1,714
You might see if you can get an idea from Jake Good's build page. He fabricates most everything he needs including e-brake and cutting brake assemblies.
 

gunnibronco

Contributor
Sr. Member
Joined
Apr 13, 2008
Messages
628
Loc.
Gardnerville, NV
But most are at a sloop..

Are you referring to the mounting base being sloped/angled wrong?

I'm in the same situation, my truck is apart, and I'd rather have a hand e-brake than the stock foot brake.

I do body work, and recently, our shop replaced the hand brake assembly in a newish Wrangler (Jeep only sold the cable with the hand brake-IDK). I grabbed the old hand brake that came off the customer's car. It has a flat mounting bracket & I think it can work. But I have not done anything to actually try to install it yet.

If you want a pic, I'll get one.
 
OP
OP
Pa PITT

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
GUNNIE I THINK THAT'S WHAT YOU WANT.
.. Sloped is what I meant.. As I recall in that post about 2 + years ago the guys here were talking about flat mountings.. I think it what you want.
 

gunnibronco

Contributor
Sr. Member
Joined
Apr 13, 2008
Messages
628
Loc.
Gardnerville, NV
Here are a couple pics of the Heep brake.





Do you know of any threads showing an installation of this brake? I found a thread with it mentioned, but no pics.

I'll post up when I start trying to install it. But it will be a little while, I have some more stuff to do before I get to that point.

I hope I can squeeze it in on the right side between my console & seat.
 
OP
OP
Pa PITT

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
..I don't remember any pictures either. But that looks like what I read years ago. & I believe there are Business that can make you a custom cable. .. I'd say if you have the Jeep end to show them . & then have the Bronco cable . Measure the length you need. & I think they can make you one.
 

ntsqd

heratic car camper
Joined
Jan 30, 2005
Messages
5,970
Loc.
Upper SoKA
Stock Bronco front cable worked with the Fiero e-brake hand lever. Just had to make a bracket to bolt it to that included an anchor hole for the housing.
 
Top