• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

hazard lights

bluebronco69

Bronco Guru
Joined
Feb 15, 2005
Messages
1,856
Loc.
Damascas, OR
hey got a question, i have never been able to figure this out and i have been just working around it for along time but my hazards do not work. well they do work but i have to have the turn signal lever either in the left or right position and the key has to be in the on position (dunno bout the accessory position it is really difficult to ge tthe key to move to that side) anyways does anyone have any idea on this? i was going to check the flasher units for corrosion theya re new but maybe a bad connection at one of them? also since i have to have a turn signal on (either left or right) on the rear lights whichever side i have the lever is set to that light is slightly brighter than the other light, but the front ones are equal in brightness,
they do work with or without running lights
any one got any ideas?
thanks
 
Top