• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

HEI Distributor Questions

BUCKETOBOLTS

Bronco Guru
Joined
Oct 28, 2003
Messages
1,605
Loc.
Salisbury, NC
I think I'm going to go with one of the HEI conversion distributors in my new 393. I'm not sure but I believe I can use a set of plug wires off of a later model engine to work with the HEI style cap. What plug wires do work with these dist.?
 

Bronchopper

Full Member
Joined
May 4, 2005
Messages
173
Loc.
Incirlik, Turkey
depends on what type of dist. you are using. i put a MSD on the wife's bronc only to figure out that they have ends like the spark plug for the dist. too. easy fix though. just bought the correct wires and all is good.
 
Top