Hellwig sway bar rubbing tires

[WPS 73 Bronco]

I completed the install of 1.5" coil springs and the Hellwig sway bar. I have tire rubbing on full right turn on the drivers side. I can't move the bar much towards the passenger side due to the pitman arm. Any suggestions?

I've checked the axle alignment also and its dead center.

 

[Apogee]

You could adjust your steering stops and/or add wheel spacers, either of which should address the interference if it's not a major one. I don't run a Hellwig bar, but what size wheels and tires are you running, and what's the backspacing on the wheels?

 

[WPS 73 Bronco]

I’m running 35” tires and I already have wheel spacers. I’ll look at the steering stops.

 

[.94 OR]

Do your tires rub on the radius arms?
I run 31's and they rub on the radius arms but clear my Hellwig bar.

 

[WPS 73 Bronco]

No rub on the radius arms. I think it’s because of the 2” wheel spacers.

 

[JefeAZ]

Any photos? Mine originally came with the wrong length end links