• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

How are you securing your Bronco?

patterdale

Bronco Guru
Joined
May 24, 2010
Messages
1,252
Nothing you do will stop a roll back which was pointed out to me as the preferred way to steal cars in a very similar post earlier on.
 

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
I wouldn't put much faith in any sort of kill switch. A lot of stolen cars are towed away. Usually no one will even question a car being hooked up to a tow truck in a parking lot or driveway. I'll stick with my own version of alarm system with special surprises.;)
 

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
You can only provide so much protection. If a thief is determined to get the rig no countermeasure will stop them. Best you can do is have some diligence in theft deterrence (hood lock, alarm, removable steering wheel, kill switch, twinsticks, etc.). Any one of those is better than no deterrence at all.

I'd feel pretty stupid if somebody jumped in my top off EB, jammed a screwdriver in the ignition and off they went. Any basic level of countermeasure would prevent the more common thefts.
 

67RT

Bronco Guru
Joined
Jan 17, 2014
Messages
1,308
Alarms dont work unless your the one who hears it. Years ago when every body had a alarm they went off so often nobody paid any attention to them!

Id say just dont leave anything of value in the truck! Even with a top and doors on nothing is safe. If your gona worry about your truck everytime you drive it someware then its best not to drive it!

You could unhook the battery, put a fuel shutoff switch, hook up a switch that would disable the starter and instead sound the horn when the key is turned.

Most important thing said is to make sure you have a stated amount insurace policy.

Not "stated". You want an 'Agreed" value policy...
 

MarsChariot

Contributor
Planetary Offroader
Joined
Oct 12, 2004
Messages
2,605
Loc.
Albuquerque, New Mexico
I just saw this over on the Fiat forums on a crazy bad (6 lb per hp) build. I thought I would share it here as one idea, with variations, on how to deter thieves.;D
 

Attachments

  • IMG_1075_zps09dac533.jpg
    IMG_1075_zps09dac533.jpg
    87 KB · Views: 119

chuzie

Bronco Guru
Joined
Jul 21, 2006
Messages
2,761
I can neither confirm nor deny ;) my Bronco has a latched relay connected to a plain sight switch of another unrelated function. The relay energizes the IGN, FP, and 4r70w controller when actuated.

They could jump the starter solenoid but would run out of fuel fast (EFI).
They could jumper the fuel pumps but they aren't going anywhere without a transmission or a tow truck.

So, why not just connect the transmission? Because by the time they waste precious minutes troubleshooting the IGN and then the FP, I suspect they will likely give up before working on the transmission.

That is when they call their buddy with the tow truck.
 

Kbpony

Sr. Member
Joined
Jan 31, 2012
Messages
386
I've pulled the rotor out of the dizzy before, but honestly not usually too concerned. We're pretty small-town here.
 

El Kabong

Contributor
Driving stuff Henry built
Joined
Oct 8, 2009
Messages
1,559
I have a TUTS* security system that seems to work pretty well.











*TUTS -Too Ugly To Steal
 

hucklburry rev2

Sr. Member
Joined
Jan 17, 2006
Messages
772
A reed switch to the fuel pump and battery are good deterrents, mount it behind a piece of metal on the dash and have a decent magnet on the key ring, put the magnet on the metal and it will complete the circuit. The nice part about reed switches is their is no visible cut off, you have to know where it is and you have to have a magnet.

I read once someone took a headphone jack, shorted the male side, wired ignition through female side. So you had to insert the headphone plug into the jack on the dash to complete ignition circuit to start with the key. Small hole in dash, who knows what for. Kinda cool IMHO.
 
Top