• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

In tank fuel pump wiring.

WILDHORSES

Sponsor/Vendor
Bronco Guru
Joined
Nov 7, 2003
Messages
2,253
Loc.
USA
Hi I am wiring in an in tank fuel pump for a bc broncos fuel tank. There is only one spade connector coming through the access plate for the power wire to the pump so I assume I have to wire the ground wire to the stud provided right?

https://photos.app.goo.gl/XPnaBLN7sHsTUj8q9

https://shop.broncograveyard.com/Images/10203f.jpg

Also I found two magnets in the tank. Is it ok to leave them in?

Your pics look correct. The mags will pick up loose metal shavings but clean out the tank as much as possible before install.

Jim
 
Top