• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Inner fender stamped wrong?

kdjackpi

New Member
Joined
Dec 14, 2006
Messages
3
Has anyone else seen this? It looks to me like the right inner fender was stamp incorrectly. It is about ½” past the front of the core support and about ¾” too long towards the rear where it connects to the front of the wheel tub. If it is stamped wrong it possible that it was corrected in later years if the dies were ever replaced.

I'll post some picture if I ever figure out how.
 
Last edited:

bknbronco

Bronco Guru
Joined
Jan 17, 2011
Messages
4,388
Loc.
North Metro, MN
Welcome to Classic Broncos. As youll learn nothing you buy for parts will be direct bolt on. Everything needs cutting, grinding, beating, welding, and more grinding. It could be that your original core support got bent back somehow over the years or it could be that you body mount bushings are shot and thats pulling the entire front clip back. I would say your in luck since the piece is too long, its easyer to cut than to rent a "left handed metal stretcher";) Even a $400 grill i got needed to be heavly modified to fit my bronco. I never expect a bronco part to fit correctly...then if it does youll be that much more excited. I cant tell you how many hundreds of dollars i have spent in the last year on bronco parts that were junk and i ended up throwing away! And its not one particular vender, they all sell the same brands for the most part. Wait until you start buying new rubber seals and they crumble a week after you open the bag! Thats just broncoing for ya!

The front should obviously be flush with the core support. But the rear might be long so you can overlap the original metal and weld it. Youll just have to play around and see what works out for your scenerio. Good luck and have fun! If it was easy everyone would want a bronco.
 

KOBALTBLUE

Jr. Member
Joined
Dec 15, 2012
Messages
117
Loc.
Daphne,Al
Easy to post pix's just go to Photo bucket and upload then hover over the picture, Hit the gear that pops up----Get links---scroll down to IMG codes (forums)---click on (it will say copied)----Come back here and right click then paste...



Just wait if you buy more parts like front fenders




MARCH302013002_zps995059e2.jpg


MARCH302013010_zpsfbaffa73.jpg


MARCH302013013_zps5025755e.jpg




The only thing I bought that fit great was the doors but even they needed to be cut in the hinge area slight trim on the hinge sheet metal not a big deal like the fender....Parts for these things fit like shit! :eek:
 

bknbronco

Bronco Guru
Joined
Jan 17, 2011
Messages
4,388
Loc.
North Metro, MN
or just donate your lunch money for a day and help keep this site alive! Contributer status lets you post pics easly and keeps them small so we dont use up all Jons space that he upgraded to a year ago. Thanks again Jon!!
 

Crawdad

Bronco Guru
Joined
Feb 16, 2011
Messages
3,635
Do you have new body mount bushings? Always read that its like having insurance, sorta like a square foundation to start with when adding panels.
 
OP
OP
K

kdjackpi

New Member
Joined
Dec 14, 2006
Messages
3
The part I'm talking about is the original inner fender, it didn't line up at the factory. So they just line it up at the kick panel where the vent passes through and didn't worry about the rest. The section between the front of the well tub and the core is too wide. It extends too far forward at the core but to far to the rear at the wheel tub.
 

bknbronco

Bronco Guru
Joined
Jan 17, 2011
Messages
4,388
Loc.
North Metro, MN
loosten that front body mount. That should allow the core support to push forward a little maybe. Then grab the wheel tub and flex it till it lines up. Its gona take some effort on your part to get things where you want them. Noting you do on the bronco is gona fall into place. Make adjustment where necessary, make a judgement call on if you should tweek what you have or just cut the new piece to make it fit. Give a little and take a little, find a happy medium then call it good. Were not building a muscle car, the broncos were built for farm use not car shows. On alot of installs there is no right or wrong way to do it....theres just the way that works for "your" bronco. Without being there and seeing it first hand its hard to say what you should do.

And remember this is a bronco....its entirly posible that the inner fender isnt stock and was replaced by some hack job machanic 15 years ago.

Again good luck and dont get discouraged. I have wanted to take my bronco out to pasture more than a few times before!
 
Last edited:
Top