Jeremy0201
Full Member
Hello, I have extreme shearing to the front perch of the rear leaf spring hangar. I bought replacements that were cut from another frame. My question is when I cut mine away can I i keep the part that connects to the under portion of the frame by just cutting the rivets. My thought is that I could put a bolt through where the rivets were so everything would line up easy for welding the upper portion back in place. I worry that I would incorrectly mount them or mount them unevenly.. See my photos, any thoughts or suggestions are helpful, I also have the replacement metal eyelets that you can drill out the existing sheared part and weld in the eyelet. I feel mine are too far gone for that type of repair. The whole nut was coming through the sheared part on the pass side.











