• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Junk Yard source for interval wiper switch?

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
Title pretty much says it. The ones I've seen offered by the venders are described as used. I know where to find any Ford truck made in the late '70s, but I don't know what yr. and model had the interval wiper switch that works in an EB.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Pretty much any mid 70's up to early 90's pickups and broncos also some vans have what your after. In the 70's it was usually only found in the customs. In the 80's it could be found almost all trucks and broncos. In the 90's Ive mostly found them in broncos but some of the trucks still had them although after 92 I believe all the wiper switches are a different style mostly in the turn signal switch. You shouldnt have any issue finding one tho. If you do let me know I have a bunch.
 
OP
OP
J

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
Thanks for the info and offer. I'll be looking at the U Pull It to see what's there. I do that at regular intervals and almost always find something, I or someone else, can use.
 

mattt

Bronco Guru
Joined
Sep 23, 2006
Messages
3,814
The way to ID the intermittent switch is by how the switch operates when turned. Regular switches have 3 distinct clicks when turned. The intermittent switch has 2 clicks one direction, and a sweeping range when turned the other direction. You don't have to look under the dash for the delay box....just turn the switch and see what action you feel on the switch shaft. I've seen them most often in XLT trucks. Good luck.
 
OP
OP
J

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
The questions that I have is, will these switches fit the same hole in the dash?; will the EB knob fit on one of these switches?; and is the connector compatible with the OE harness? I had the impression that trucks would be more likely to have what I'm looking for. Ford cars had the wiper controls moved to the turn signal switch around '90.
 

BigToe

Sr. Member
Joined
Nov 24, 2012
Messages
517
I was just up at our local PNP earlier today and there are plenty of donors out there right now. Like Broncnaz said, just about any 80's/ early 90's pickup has 'em and by that time it became the standard even in pickups.
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
The questions that I have is, will these switches fit the same hole in the dash?; will the EB knob fit on one of these switches?; and is the connector compatible with the OE harness? I had the impression that trucks would be more likely to have what I'm looking for. Ford cars had the wiper controls moved to the turn signal switch around '90.

Yes it fits in the dash hole perfect.
The rod is a wee bit long but you can quickly cut it off to the right length.
The classic eb knobs will go right on that cut rod.
The delay box will screw down to a hole already drilled on the bottom of the dash....as if Ford intended to make it an option on eb's at some point.

WH has a nice photo on their web site of this very switch.
 
OP
OP
J

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
Just another one of the features and options Ford had but didn't put in the Broncos. These include the 351w, AM-FM, F150 tilt steering column, etc.
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
The ones in the late '70s trucks are the hardest to find. They'll mostly likely be in the '78-'79 trucks and most frequently in the Ranger XLT trim package rigs.

'80-'86 trucks had a lot of different mounting configurations for them. The delay box may be attached with 1-2 screws on the underside of the dash (need a 7mm socket) or by a Phillips screw on the dash behind the instrument cluster. Often the wiper switch wiring is zip-tied into some of the other cluster wiring and you'll need a pair of side cutters or a pocket knife to cut the zip tie. If the truck has a hood lock handle on the underside of the dash, you may need to remove it to get to the delay box mounting screws. The hood lock handle will require an 8mm socket. A bezel tool (Nickstrix sells them) or a needle nose screwdriver will remove the locking nut on the dash that retains the switch.

The '88-'91 trucks are usually the easiest to find and easiest to push switches from. The '87 and early '88 trucks have the delay boxes mounted in such a way that they're nearly impossible to remove. You can tell the difference by a "narrow" and "wide" cutout in the plastic underdash covers. If you see a "narrow" one - go on to the next truck. You'll again need the 7mm socket to remove the screw for the delay box in the "wide" cutout next to the e-brake lever. Then look for another screw on the underside that retains the ground wire for the delay box. Use that same 7mm socket to remove the metal bracket that holds the wiper switch and headlight switch to the dash. A 5/8" socket will remove the hex nut retaining the switch to the metal bracket. Pull the switch, ground wire, delay box and associated wiring out and disconnect the assembly from the harness with a firm tug.

Todd Z.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
One good thing about the pick and pulls is usually other stuff is missing already and you can usually get the setups out fairly easy. I know when I hit up the pick and pulls I usually grab them all might take 5minutes on each.

Yes just another feature that ford didnt get around to doing in the broncos or even other early 70's trucks.
 
Top