• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Kirk’s Explorer EFI Thread - 408W

GrillMaster

Contributor
Bronco Guru
Joined
Jun 5, 2008
Messages
2,505
Figure I’d post an EFI thread and document this journey and hopefully spark some interesting discussions, let me know if you have any tips for me. Gary/EFI Guy has been amazing helping me along the way so far.
 
Last edited:
OP
OP
GrillMaster

GrillMaster

Contributor
Bronco Guru
Joined
Jun 5, 2008
Messages
2,505
Found a donor 5.0 Explorer motor from another Bronco guy. Was in his bronco and the computer had been flashed by EFI Guy. He was upgrading to a Coyote.
IMG_6468.jpeg
 
OP
OP
GrillMaster

GrillMaster

Contributor
Bronco Guru
Joined
Jun 5, 2008
Messages
2,505
Got the Sherman Tank from WildHorses installed. Ditched the hitch and think I picked up some ground clearance, and another 10 gallons of capacity.
IMG_0245.jpeg
IMG_0241.jpeg
IMG_0244.jpeg
IMG_0238.jpeg
 
OP
OP
GrillMaster

GrillMaster

Contributor
Bronco Guru
Joined
Jun 5, 2008
Messages
2,505
On the harness, a couple of the injector plugs have their locking ears broken off, is there a 2-pin EV1 injector connector replacement housing or do you need to replace the whole connector?
 

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,720
Loc.
San Martin, CA
Rock auto usually has replacements plugs but you have to get them with pigtails.

I usually pick up some spare connectors when I am at the wreaking yard, then swap out the plastic plugs when needed.
 

kman67

Contributor
Full Member
Joined
Apr 8, 2005
Messages
180
Loc.
Aptos
I’m not sure what the Explorer injector plug looks like. I’ve got a mustang harness with the plastic latches. I found some on ebay so I could un pin my wires and replace the plastic part. I tried the newer style with the metal clip, but my wires wouldn’t fit in that housing.


2640e772cc710df074d1ce4bfb3758b0.jpg

86cf11aa6fd56219d67984128eb4b13f.jpg

968c5e96ea3a1ee32988e68bab1a538d.jpg

5d307c6873d1f0bc8bc8bd7eb3c8764d.jpg

93a0eaeeb57230bf95e3e670234676f2.jpg

2e61d262789b334184ad0222fa13a067.jpg



Sent from my iPhone using Tapatalk
 
OP
OP
GrillMaster

GrillMaster

Contributor
Bronco Guru
Joined
Jun 5, 2008
Messages
2,505
That looks like them. Did you find used or new? These are pretty old and brittle. Side tabs just snap off.
 
Top