Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
I'm now looking at a later model 302 engine. I know the balancer is heavier. Can I run a stock 77 bronco flywheel? I have the stock 77 c4 and bell housing
Guess I could run the smaller flywheel that is on the engine (smaller diameter wise) but I would need a different bell housing, right? Or What fly wheel has the heavier weight but the older bronco size in order to properly fit in a stock 77 Bronco c 4 set up? Thx
Ok, I was doing some research here. Wild Horses has a 50 0z flex plate with the 164 tooth. That should work on the engine and be usable for my C4, "I think". What vehicles had this flexplate, might be easier to go down to autozone and get one if I had an idea what year and vehicle to check.