• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Late model302 balancer

Ohio Bronco 21

Bronco Guru
Joined
Dec 5, 2006
Messages
4,194
Loc.
Cleveland
I'm now looking at a later model 302 engine. I know the balancer is heavier. Can I run a stock 77 bronco flywheel? I have the stock 77 c4 and bell housing
 

Fairlane514

Sr. Member
Joined
Oct 28, 2013
Messages
508
Loc.
Houston
The early balancers were 28 oz, the later models were 50 oz. Your flywheel imbalance and harmonic balancer have to match.
 
OP
OP
Ohio Bronco 21

Ohio Bronco 21

Bronco Guru
Joined
Dec 5, 2006
Messages
4,194
Loc.
Cleveland
Guess I could run the smaller flywheel that is on the engine (smaller diameter wise) but I would need a different bell housing, right? Or What fly wheel has the heavier weight but the older bronco size in order to properly fit in a stock 77 Bronco c 4 set up? Thx
 
OP
OP
Ohio Bronco 21

Ohio Bronco 21

Bronco Guru
Joined
Dec 5, 2006
Messages
4,194
Loc.
Cleveland
Ok, I was doing some research here. Wild Horses has a 50 0z flex plate with the 164 tooth. That should work on the engine and be usable for my C4, "I think". What vehicles had this flexplate, might be easier to go down to autozone and get one if I had an idea what year and vehicle to check.
 

PaveBronco

Sr. Member
Joined
Oct 30, 2012
Messages
914
late model explorer...mine is a 96, its going to be matched up with my C4. 50oz balancer and flexplate 164...
 
OP
OP
Ohio Bronco 21

Ohio Bronco 21

Bronco Guru
Joined
Dec 5, 2006
Messages
4,194
Loc.
Cleveland
Thanks. Does any one make a good radiator hose for the opposite side exit water pump for use with our stock radiators?
 
Top