Lets Beat this Disk Master Cylinder Thing into the Ground

[michael084]

Anyone? I can't find this check valve.

What does your master cylinder look like? You may have one from a later bronco, I had went to the parts store when I did my disc conversion and bought a master cylinder that was supposed to be for a 74 bronco, but it turned out to be the later one with no residual pressure valve. Do you have this? http://broncograveyard.com/bronco/i-12506_master_cylinder__1968_-_75.htm
Or this? http://broncograveyard.com/bronco/i-12508_master_cylinder__1976-77.htm

 

[mrshoeit]

pushrod

What are you guys using for a pushrod on the 10-1638 MC? I got one from advanced and it didnt come with one and the local ford dealer cant get one.

Thanks Scott

 

[Frankenhorse]

What are you guys using for a pushrod on the 10-1638 MC? I got one from advanced and it didnt come with one and the local ford dealer cant get one.

Thanks Scott

I think BC has one. Stock replacement. Not sure it is what you need but I'll throw it out anyway.

 

[Brewbro21]

Does anyone know if the 00-03 mustang gt MC will work with a disc/drum setup? I didn't think that the gt's came with rear discs but who knows.

 

[jbeyer]

What are you guys using for a pushrod on the 10-1638 MC? I got one from advanced and it didnt come with one and the local ford dealer cant get one.

Thanks Scott

you cant reuse the one you have? it just pulls out.

 

[airman]

What does your master cylinder look like? You may have one from a later bronco, I had went to the parts store when I did my disc conversion and bought a master cylinder that was supposed to be for a 74 bronco, but it turned out to be the later one with no residual pressure valve. Do you have this? http://broncograveyard.com/bronco/i-12506_master_cylinder__1968_-_75.htm
Or this? http://broncograveyard.com/bronco/i-12508_master_cylinder__1976-77.htm

Thanks for that response. I have one that looks like the second one for 76-77 but the lines are on the driver side. It absolutely has the same cover and has a small res (rear brake front of MC) and a large side (front Brake rear of mc). Now that I think of it, it always seemed like I was getting great drum braking from the front and lousy from the back.

Man I sure am glad you posted that one. I imagine the built one with driver side ports or that JBG could have flipped the picture.

Thanks Michael084

Jeff

 

[Brewbro21]

Does anyone know if the 00-03 mustang gt MC will work with a disc/drum setup? I didn't think that the gt's came with rear discs but who knows.

Anyone out there know this? There has to be some gt drivers out there. %)

 

[mrshoeit]

Pushrod

No I cant use the stock pushrod because it is too small. The hole in the f250 MC. is alot bigger then the EB stock MC. I thought about making one but dont know the measurements. Anyone have any ideas?

Thank scott