• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Let's go fast

Godwick

Sr. Member
Joined
May 14, 2011
Messages
407
Loc.
Santa Barbara, CA
Alright: stock build 96 roller 351w. 4.10 gears. Nv3550 and 32" tires. 2 barrel holly carb and BH shorty headers.
Right now I'm not liking the shift possibilities. I want this bronco to go fast on street and maybe in dunes and on street 1 winds out at 3mph and 2nd and 3rd ain't that hot either.
So I'm kinda stuck. I go higher in gear, I get more womp in the seat feeling but have a worse gear wind out. Or I could go lower gear more power? Like maybe some better heads and cam?
Holler at me Bronco brothers.



Sent from my iPhone using Tapatalk
 

broncosbybart

Bronco Guru
Joined
Mar 13, 2002
Messages
2,644
Are you talking with the truck in low range? Just leave it in high. The 3550 doesn't have a really low 1st.
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
What does your tach say your RPM's are?

If you aren't used to how a small block Ford revs, it can really sound like it's wound out when it still has plenty to go.
 

AxlesUp

Sr. Member
Joined
Dec 21, 2001
Messages
424
Loc.
Collierville TN
Tire diameter (in.):31.5
RPM:6500
1st Gear Ratio:4.10
2nd Gear Ratio:2.33
3rd Gear Ratio:1.39
4th Gear Ratio:1.00
5th Gear Ratio:.78
Final Drive Ratio:4.10
1st Gear (mph):36
2nd Gear (mph):64
3rd Gear (mph):107
4th Gear (mph):149
5th Gear (mph):190


http://www.apexgarage.com/tech/gear_ratios.shtml

no reason you shouldn't be taking off in second gear in high range with a 351. i take off in third which is 1.74 for me and i have 37" tires with 4.56 gears and a tired 351.

if you really need more power i would start with cam and bigger carb or fuel injection. then go to heads.
 
OP
OP
Godwick

Godwick

Sr. Member
Joined
May 14, 2011
Messages
407
Loc.
Santa Barbara, CA
I'm in High gear in rear. The nv3550 might not have a super low 1st, but it winds out very quickly. If I go smaller tires, I understand that it will wind out less quickly, but there's a looks compromise there too. I'm not sure the rpms, I'm just shifting when it feels right to do so - I.e. Just After peak power.
Cam makes sense. Anyone have good cheap cam recommendation?


Sent from my iPhone using Tapatalk
 

broncosbybart

Bronco Guru
Joined
Mar 13, 2002
Messages
2,644
Bigger tires= lower cruising rpm and slower acceleration. I'd try that first if you can fit them. They can tend to make it handle worse though.
 

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
I'm in High gear in rear. The nv3550 might not have a super low 1st, but it winds out very quickly. If I go smaller tires, I understand that it will wind out less quickly, but there's a looks compromise there too. I'm not sure the rpms, I'm just shifting when it feels right to do so - I.e. Just After peak power.
Cam makes sense. Anyone have good cheap cam recommendation?


Sent from my iPhone using Tapatalk

The NV3550 does have a fairly low 1st gear, but not so low that you would be wound out at 3 mph.
Check your transfer case again. Maybe the shifter is messed up.
 
OP
OP
Godwick

Godwick

Sr. Member
Joined
May 14, 2011
Messages
407
Loc.
Santa Barbara, CA
Yes, 3mph is wrong. I exaggerated. I'm not really winding out that low of an mph. But it's relatively quick. I guess my question is what is the best route to extend my shift points and have more acceleration feeling. I can go down an inch or two in tires, I suppose, and maybe a cam swap and other speed tricks will coalesce into something more perfect. The bronco is still drivable, just looking to optimize.


Sent from my iPhone using Tapatalk
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
You're still thinking in the wrong direction Godwick. You need larger tires to bring the rpm down at the same speed.
Sticking with the same size tire and gearing and changing your engine power or power band will not bring the rpm down either. It just gives you more power at a given point.

I'm not sure what rpm Axles Up used as the maximum speeds, but you can clearly see that you don't necessarily need to go faster. Just rev the engine up more and be happy. If you add too much gearing to lower the rpm, how is that going to get you ripping up a sand dune? It's not.
In fact it's more likely than not going to dig you in deeper as the engine is trying to spin the tires faster than the actual speed of the vehicle needed to stay on top of the sane.

At 70 mph with your current setup you're likely only turning 2600-2700 rpm or so (just guessing) which is pretty sweet for an EB.
I hear what you're saying if it's sounding like it's tached out at lower speeds, but as was said I think you need to find out exactly what the rpm is so you can better see what you need.
If you bring the rpm down too much, you lose some of that snappy off-the-line power. It sounds like you have plenty to spare from what you are saying, but it would still be nice to know exactly where the next modification is going to put you. Whether it's messing with the tire size, the diff gearing or the engine powerband, it's just nice to know that last little tidbit of information.

Good luck whichever way you go. Stay safe!

Paul
 

Soylent

Contributor
Sr. Member
Joined
May 4, 2016
Messages
690
Loc.
California
I agree with Sykanr0ng. I hadn't driven a sb Ford in over 30 years and thought I was pegged at the red line at shifts just by the feel and sound. I installed a tach and realized this was occurring at 2000 rpm

Sent from my SAMSUNG-SM-G870A using Tapatalk
 
OP
OP
Godwick

Godwick

Sr. Member
Joined
May 14, 2011
Messages
407
Loc.
Santa Barbara, CA
Great info, Paul. Thank you for correcting my thinking. If I'm ever in San Jose, ill buy you a beer. Re: engine revs I'll look into it, but therein is the crux - getting off the line power that feels torquey but doesn't require excessive shifting. I've got a problem with 2nd on the nv3550, so that's an issue to address 1st. Just trying to think of options. Still like the cam idea which will likely be on my radar once o get money again. Thanks, all.


Sent from my iPhone using Tapatalk
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Did you install the 3550 or was it done prior to you buying the rig? Reason I ask is that it's good to know that someone put the correct transmission fluid in it. It's not your standard gear lube, and anything other than the factory stuff used to void the warranty when they were sold in the vehicle.

I think even now there are only a handful of companies that make the correct lubricant.
May not be your second gear issue, but thought I'd bring the subject up again in case you were not aware of it.

Paul
 

77RHINO

Full Member
Joined
Feb 22, 2011
Messages
308
I have a 96 351, NV3550, 4.56s, and 33s (measuring 31.5 at current wear), and it is definitely fast! First gear does wind out quick for me (perfect for slow traffic though) but 2, 3 and 4 are great around town, 4/5 for faster roads and interstate. I usually get up to and past the speed limits much faster than I expect. I just put some of the old school duff traction bars on it and noticed even more throttle response than before. I did overbuild my engine for what I needed, but I never rev it past 5k rpm (cam is done by 5500 anyways). I was way off in my assumption of RPMs before I installed a tach, it was a nice surprise. In 5th I can continue accelerating well past interstate speeds and I let up before it is ready to, just because I know my rig cannot stop near as well as it can accelerate.
 
OP
OP
Godwick

Godwick

Sr. Member
Joined
May 14, 2011
Messages
407
Loc.
Santa Barbara, CA
Yeah, I was aware of the oil issue. It's not the oil. I think it's a synchro or (fingers crossed) clutch alignment, though probably the former. That's what I get for buying off eBay. All good. I'll probably have a fully workable bronco by the time I can gift it to the grandchildren!


Sent from my iPhone using Tapatalk
 

moses_m

Full Member
Joined
May 5, 2013
Messages
262
302 nv3500 4.56 gears 33s. I leave transfer in 4H and use 1st gear to drive around most dunes south of glamis in mexico. I leave rev limiter at 5500. On big dunes I use 1st and 2nd at base of dune and punch it uphill. I leave tires at around 10 to 12 psi no beadlock. In 4L it does seem to dig more into sand.
 
Top