let's see some speakers

[PBR]

i bought a set of these for about $80 new and just bolted them to the roll cage all the way in the back behind the rear seat. they sound good and fit perfect.

http://shop.kicker.com/KB6000/Default.aspx

 

[trailpsycho]

A week later...

So, I finally got around to taking and dowloading pics...it happens about once a year. Here are the 6X9 enclosures I made from 16 guage. They are lined inside with a Dynomat-knockoff. Sound is excellent, base is respectable. I am still working on some fronts...mounting is tight, so its been on hold. Wires are typically run along the roll bar with either zipties or some bar-tape. I used the flat style(black wire), so it makes for a low profile.

In case its not obvious, the grill mounts after the box is installed.

 

[Steve83]

 

[Project_bronco]

I haven't installed my system yet, I have an older pioneer deh-p2000. I plan on getting some Polk DB 501 speakers for the front, these things http://www.crutchfield.com/p_663QUADPOD/Select-Increments-Quad-Pods.html?c=3&tp=131&avf=N for the back, and I haven't settled on what subs to put in yet.

 

[mango]

Built this box to fit snugly under the back seat. Had to raise the seat height by 1 1/2" It has pretty good sound for the cheap stereo that powers it. I ran my wires underneath.

 

[GraficO]

I have a set of 6x9s going in soon... but here are the sub-boxes for a set of 10"s;D

3.25"s in the kickers (see build thread for details) with remote tweets on the dash.

The unfinished pics will look like the black one... I just got it sanded today