• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Leveling kit

LowCountryEB

Full Member
Joined
Dec 7, 2001
Messages
255
Loc.
Charleston, SC
I have a wildhorse 4" lift kit with 2" body lift. I am tired on my truck's stance, which is leaning forward. I want the frontend to be just a bit higher than the rear. My kit has coils in the front end. Do I need to buy blocks or what to lift up the frontend and how many inches will it lift it? And will this effect the drive train at all?
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Blocks in the front are not a good idea. You could possibly remove a leaf or 2 out of the rear spring pack to see if that gets you where you want to be or buy taller front coils.
Most lift kits do tend to ride rear high when you dont run a hard top. Also how long has the lift been on? If new it may settle to a good ride hieght after a while..

Removing a leaf or 2 in the rear would be your best bet as it shouldnt affect the drive train at all where adding even taller front coils may affect your handling and could cause some front driveshaft issues.
 
Top