• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Locking under rear seat storage box

TAWL_BOY

Sponsor/Vendor
Full Member
Joined
May 26, 2013
Messages
336
Loc.
Friendswood, TX
I'm planning on running 2 strips of aluminum L-Track with the moveable studs so I can move my seat up or back or take it put and use the little rings for strappin' stuff down.

Do you see any issues with mounting this storage box with those studs?
 
OP
OP
0

01Dudley

Sr. Member
Joined
Jul 16, 2012
Messages
974
Loc.
Knoxville
That would be a tough one to call. I don't see a problem with the stud part of the install, but depending on how wide the "L" bracket is the box may not fit between it. Also the box would have to either be on top of the "L" or under the "L" bracket(I am assuming the brackets will go from bolt to bolt in the factory floor?)
 

John Marinan

Contributor
Sr. Member
Joined
Aug 9, 2009
Messages
680
Loc.
Durango CO.
I bought one and noticed that it sat on the floor. Knowing that I would have water and dirt in the truck I set it up with 5 flat washers under each corner, works great. Now I can blow dirt out from under and water won't get under it and corrode it. Great box with a really nice combo lock.
 
OP
OP
0

01Dudley

Sr. Member
Joined
Jul 16, 2012
Messages
974
Loc.
Knoxville

Broncofan76

Sr. Member
Joined
Jul 2, 2010
Messages
432
Loc.
Atlanta
I got one of these a few weeks ago. Mounted it under the bestop fold and tumble rear seat. I had to space the seat up just a hair but it worked out great. The roller bearings are nice and the construction is great. Price seems right as well considering the build quality. I can post up pics if anyone is interested although mine are not so different from the other one posted here
 

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
Are the dimensions;24"x12.75"x2.75",inside or outside? The space under the seat is 25.75" wide and the outside of the box looks as if it fills this width.
 

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
The aircraft type seat tracks TAWL BOY describes are the ultimate seat mounting systems for an EB. The seat can be positioned anywhere front to back or turned to be rear facing in seconds. Removal is just as fast leaving the tracks for tie downs as he said. I think a steel strap wide enough to be secured to the seat and box on the inside with room for studs on the outside to lock into the track would work. The tracks would have to be installed further apart.
 

ChrisC74

Sr. Member
Joined
Dec 9, 2010
Messages
906
Can you please post the dims of the mounting holes? I have an aftermarket seat and do not know if the original seat hole locations were used.

Thanks,
Chris
 

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
NICE!

I used to have a jeep and before I sold the jeep I pulled the Tuffy box out of it and installed it in the bed of my truck BUT I pulled the seat out!

I was just thinking today that I wanted the ability to put my seat back in!

This is a nice set up!
 
Top