Lower radiator hose Explorer to Ron Davis radiator

[slow91fj90]

Hey guys so I got my rig running last week but I am not happy with the way my lower hose is. I went to local parts guy and found one off the wall that I thought would work. Not a good fit. Its the radiator that Wild Horses sells. The outlet on the water pump is a lot bigger than the radiator inlet. What are you guys running?

Thanks

 

[Viperwolf1]

I think I used a '94-'95 mustang lower hose before I added the oil cooler.

 

[toddz69]

Hey guys so I got my rig running last week but I am not happy with the way my lower hose is. I went to local parts guy and found one off the wall that I thought would work. Not a good fit. Its the radiator that Wild Horses sells. The outlet on the water pump is a lot bigger than the radiator inlet. What are you guys running?

Thanks

Is this the Ron Davis 5.0 radiator with the switched inlet/outlet? If so, 86-93 Mustang lower works.

Todd Z.

 

[ransil]

I used 92 mustang. I think water pump is 1 3/4" and rad is 1 1/2"

 

[slow91fj90]

I think I used a '94-'95 mustang lower hose before I added the oil cooler.

Viper-Im not using the explorer oil cooler. Would that matter?

 

[slow91fj90]

Is this the Ron Davis 5.0 radiator with the switched inlet/outlet? If so, 86-93 Mustang lower works.

Todd Z.

Not sure. It was in the truck when I got it. Here are a couple pics I just took. 86-93 Mustang lower hose, is that for 5.0 I assume?

 

[Viperwolf1]

Viper-Im not using the explorer oil cooler. Would that matter?

No. When I added the cooler I had to cut the hose into two short sections to fit.

 

[toddz69]

Not sure. It was in the truck when I got it. Here are a couple pics I just took. 86-93 Mustang lower hose, is that for 5.0 I assume?

Yes, 5.0. That hose should work just fine with that radiator.

Todd Z.