behemoth
Bronco Guru
- Joined
- Jul 2, 2003
- Messages
- 1,736
No real progress at all I stopped to allow the neighbors a chance to calm down. I figured out which one it was and now I know her work schedule, so I have a time frame now in which to work. It sucks but until I become a committee member myself I have no voice.
That sheet has a the 3 measurements that do not change. The 8 7/8" the 9 1/4" and the 3 1/2" So we are pretty much stuck with this height, unless you want to notch the frame in the front to drop the mounting point down some.
You said that Dale is having some height issues and he is using a threaded rod for adjustment. Is it that the height is actually too low for us?
So I will be working on it but it has slowed down a whole lot. I will be stripping the firewall and cleaning up what I can. Then when I pull the body to do some other work I will get going on the suspension again.
I am also looking at the 4 link for the rear as well since my stock springs are done.
Bill
That sheet has a the 3 measurements that do not change. The 8 7/8" the 9 1/4" and the 3 1/2" So we are pretty much stuck with this height, unless you want to notch the frame in the front to drop the mounting point down some.
You said that Dale is having some height issues and he is using a threaded rod for adjustment. Is it that the height is actually too low for us?
So I will be working on it but it has slowed down a whole lot. I will be stripping the firewall and cleaning up what I can. Then when I pull the body to do some other work I will get going on the suspension again.
I am also looking at the 4 link for the rear as well since my stock springs are done.
Bill











